Microsoft 70-502-VB 시험문제

여러분은 먼저 우리 ITExamDump사이트에서 제공되는Microsoft인증70-502-VB시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. ITExamDump는 여러분이 한번에Microsoft인증70-502-VB시험을 패스하도록 하겠습니다. 만약Microsoft인증70-502-VB시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.

우리 ITExamDump에서는 여러분을 위하여 정확하고 우수한 서비스를 제공하였습니다. 여러분의 고민도 덜어드릴 수 있습니다. 빨리 성공하고 빨리Microsoft 70-502-VB인증시험을 패스하고 싶으시다면 우리 ITExamDump를 장바구니에 넣으시죠 . ITExamDump는 여러분의 아주 좋은 합습가이드가 될것입니다. ITExamDump로 여러분은 같고 싶은 인증서를 빠른시일내에 얻게될것입니다.

ITExamDump 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 알 맞춤한 퍼펙트한 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편하게 인증시험을 패스할 수 있습니다.많은 it인증관연 응시자들은 우리 ITExamDump가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 ITExamDump 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.

시험 번호/코드: 70-502-VB

시험 이름: Microsoft (TS: MS.NET Frmewrk3.5, Wndws Presentation Fndation App Dev)

ITExamDump는 아주 믿을만하고 서비스 또한 만족스러운 사이트입니다. 만약 시험실패 시 우리는 100% 덤프비용 전액환불 해드립니다.그리고 시험을 패스하여도 우리는 일 년 동안 무료업뎃을 제공합니다.

Microsoft 인증70-502-VB인증시험공부자료는ITExamDump에서 제공해드리는Microsoft 인증70-502-VB덤프가 가장 좋은 선택입니다. ITExamDump에서는 시험문제가 업데이트되면 덤프도 업데이트 진행하도록 최선을 다하여 업데이트서비스를 제공해드려 고객님께서소유하신 덤프가 시장에서 가장 최신버전덤프로 되도록 보장하여 시험을 맞이할수 있게 도와드립니다.

요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 ITExamDump의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에Microsoft 70-502-VB인증시험을 패스함으로 여러분의 발전공간을 넓혀줍니다.

만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로Microsoft인증70-502-VB험을 패스하실 수 있습니다,

70-502-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-502-VB.html

NO.1 You are creating a Windows Presentation Foundation application for a car dealer. You use
Microsoft .NET Framework 3.5 to create the application.
You are creating a window that will display a list of available cars. The list will be sorted on the basis of the
Make property.
You try to run the XAML code fragment for the window. The following section of the code fragment does
not compile. (Line numbers are included for reference only.)
01 <Window.Resources>
02 ...
03 <CollectionViewSource x:Key="vw"
04 Source="{StaticResource cars}">
05 <CollectionViewSource.SortDescriptions>
06 <SortDescription PropertyName="Make" />
07 </CollectionViewSource.SortDescriptions>
08 </Window.Resources>
You receive the following error message: "Type 'SortDescriptions' was not found."
You need to ensure that the XAML code fragment sorts the list of available cars correctly.
What should you do?
A. Replace line of the XAML code fragment with the following code fragment.
<componentModel:SortDescription PropertyName="Make" xmlns:componentModel=
"clr-namespace:System.ComponentModel;assembly=System"/>
B. Replace line of the XAML code fragment with the following code fragment.
<componentModel:SortDescription PropertyName="Make" xmlns:componentModel=
"clr-namespace:System.ComponentModel;assembly=WindowsBase"/>
C. Add the following code segment immediately after the IntializeComponent method call in the
constructor.
Dim view As BindingListCollectionView = _
TryCast(CollectionViewSource.GetDefaultView(lst.ItemsSource), _
BindingListCollectionView)
If view IsNot Nothing Then
view.SortDescriptions.Add(New SortDescription("Make", _
ListSortDirection.Ascending))
End If
D. Remove lines through from the XAML code fragment. Add the following code segment
immediately after the InitializeComponent method call in the constructor.
Dim view As BindingListCollectionView = _
TryCast(CollectionViewSource.GetDefaultView(lst.ItemsSource), _
BindingListCollectionView)
If view IsNot Nothing Then
view.SortDescriptions.Add(New SortDescription("Make", _
ListSortDirection.Ascending))
End If
Answer: B

Microsoft자료   70-502-VB   70-502-VB   70-502-VB기출문제   70-502-VB

NO.2 You are converting a Windows Forms application to a Windows Presentation Foundation (WPF)
application. You use Microsoft .NET Framework 3.5 to create the WPF application.
The WPF application will reuse 30 forms of the Windows Forms application.
The WPF application contains the following class definition.
Public Class OwnerWindow
Implements System.Windows.Forms.IWin32Window
Private handle_Renamed As IntPtr
Public Property Handle() As IntPtr _
Implements System.Windows.Forms.IWin32Window.Handle
Get
Return handle_Renamed
End Get
Set(ByVal value As IntPtr)
handle_Renamed = value
End Set
End Property
End Class
You write the following code segment in the WPF application. (Line numbers are included for reference
only.)
01 Public Function LaunchWindowsFormsDialog(ByVal dialog As _
02 System.Windows.Forms.Form, ByVal wpfParent As Window) As _
03 System.Windows.Forms.DialogResult
04 Dim helper As New
05 System.Windows.Interop.WindowInteropHelper(wpfParent)
07 Dim owner As New OwnerWindow()
08
09 End Function
You need to ensure that the application can launch the reusable forms as modal dialogs.
Which code segment should you insert at line 08?
A. owner.Handle = helper.Owner
Dim db As New System.Windows.Forms.DialogResult()
Return db
B. owner.Handle = helper.Owner
Return dialog.ShowDialog(owner)
C. owner.Handle = helper.Owner
Dim result As Nullable(Of Boolean) = wpfParent.ShowDialog()
If result.HasValue Then
Return If(result.Value, System.Windows.Forms.DialogResult.OK, _
System.Windows.Forms.DialogResult.Cancel)
Else
Return System.Windows.Forms.DialogResult.Cancel
End If
D. owner.Handle = helper.Handle
Dim result As Nullable(Of Boolean) = wpfParent.ShowDialog()
If result.HasValue Then
Return If(result.Value, System.Windows.Forms.DialogResult.OK, _
System.Windows.Forms.DialogResult.Cancel)
Else
Return System.Windows.Forms.DialogResult.Cancel
End If
Answer: B

Microsoft pdf   70-502-VB자료   70-502-VB dumps   70-502-VB pdf   70-502-VB pdf

NO.3 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You include functionality in the application to troubleshoot the window behavior.
You need to display a list of UI elements at a position in the window that is decided by the mouse click.
You also need to ensure that the list of elements is displayed in a message box.
Which code segment should you include in the code-behind file?
A. Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
controlsToDisplay = CType(sender, UIElement).ToString()
MessageBox.Show(controlsToDisplay)
End Sub
B. Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
For i = 0 To VisualChildrenCount - 1
controlsToDisplay += GetVisualChild(i).ToString() + "\r\n"
Next
MessageBox.Show(controlsToDisplay)
End Sub
C. Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
Dim myVisual As Visual()
For i = 0 To VisualTreeHelper.GetChildrenCount(CType(sender, _
Visual)) - 1
myVisual(i) = CType(VisualTreeHelper.GetChild(CType(sender, _
Visual), i), Visual)
controlsToDisplay += myVisual.GetType().ToString() + "\r\n"
Next
MessageBox.Show(controlsToDisplay)
End Sub
D. Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
Dim pt As Point = e.GetPosition(Me)
VisualTreeHelper.HitTest(Me, Nothing, _
New HitTestResultCallback(AddressOf HitTestCallback), _
New PointHitTestParameters(pt))
MessageBox.Show(controlsToDisplay)
End Sub
Private Function HitTestCallback(ByVal result As HitTestResult) As _
HitTestResultBehavior
controlsToDisplay += result.VisualHit.GetType().ToString() + "\r\n"
Return HitTestResultBehavior.Continue
End Function
Answer: D

Microsoft인증   70-502-VB dump   70-502-VB   70-502-VB

NO.4 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You plan to use the application to preview video files.
You write the following XAML code fragment.
<Window
x:Class="myClass" xmlns=
"http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="myWindow" Height="300" Width="300">
<StackPanel Background="Black">
<StackPanel HorizontalAlignment="Center"
Orientation="Horizontal">
<Button Name="btnPlay" Margin="10" Content="Play" />
</StackPanel>
</StackPanel>
</Window>
You need to ensure that the application plays only the first 10 seconds of a video that you want to preview.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Insert the following XAML fragment at line 03.
<MediaElement Name="myMediaElement" Stretch="Fill" />
B. Insert the following XAML fragment at line 03.
<MediaElement Name="myMediaElement"
Source="MediaFileSelected.wmv" Stretch="Fill" />
C. Create the following method in the code-behind file.
Public Sub PlayMedia(ByVal sender As Object, _
ByVal args As RoutedEventArgs)
myMediaElement.Play()
End Sub
D. Insert the following XAML fragment at line 07.
<StackPanel.Triggers>
<EventTrigger RoutedEvent="Button.Click" SourceName="btnPlay">
<EventTrigger.Actions>
<BeginStoryboard Name= "myBegin">
<Storyboard SlipBehavior="Slip">
<MediaTimeline Source="MediaFileSelected.wmv"
Storyboard.TargetName="myMediaElement"
BeginTime="0:0:0" Duration="0:0:10" />
</Storyboard>
</BeginStoryboard>
</EventTrigger.Actions>
</EventTrigger>
</StackPanel.Triggers>
E. Insert the following XAML fragment at line 07.
<StackPanel.Triggers>
<EventTrigger RoutedEvent="Button.Click" SourceName="btnPlay">
<EventTrigger.Actions>
<BeginStoryboard Name= "myBegin">
<Storyboard SlipBehavior="Slip">
<MediaTimeline
Storyboard.TargetName="myMediaElement"
BeginTime="0:0:0" Duration="0:0:10" />
</Storyboard>
</BeginStoryboard>
</EventTrigger.Actions>
</EventTrigger>
</StackPanel.Triggers>
Answer: A AND D

Microsoft pdf   70-502-VB   70-502-VB   70-502-VB최신덤프

NO.5 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application uses several asynchronous operations to calculate data that is displayed to the user. An
operation named tommorowsWeather performs calculations that will be used by other operations.
You need to ensure that tommorowsWeather runs at the highest possible priority.
Which code segment should you use?
A. tomorrowsWeather.Dispatcher.BeginInvoke( _
System.Windows.Threading.DispatcherPriority.Normal, _
New OneArgDelegate(AddressOf UpdateUserInterface), weather)
B. tomorrowsWeather.Dispatcher.BeginInvoke( _
System.Windows.Threading.DispatcherPriority.DataBind, _
New OneArgDelegate(AddressOf UpdateUserInterface), weather)
C. tomorrowsWeather.Dispatcher.BeginInvoke( _
System.Windows.Threading.DispatcherPriority.Send, _
New OneArgDelegate(AddressOf UpdateUserInterface), weather)
D. tomorrowsWeather.Dispatcher.BeginInvoke( _
System.Windows.Threading.DispatcherPriority.Render, _
New OneArgDelegate(AddressOf UpdateUserInterface), weather)
Answer: C

Microsoft기출문제   70-502-VB기출문제   70-502-VB자료   70-502-VB

NO.6 5. The application, named EnterpriseApplication.exe, runs over the network.
You add the WindowSize parameter and the WindowPosition parameter to the Settings.settings file by
using the designer at the User Scope Level. The dimensions and position of the window are read from the
user configuration file.
The application must retain the original window size and position for users executing the application.
You need to ensure that the following requirements are met:
The window dimensions for each user are saved in the user configuration file.
User settings persist when a user exits the application.
Which configuration setting should you use?
A. Private Sub OnClosing(ByVal sender As Object, ByVal e _
As System.ComponentModel.CancelEventArgs)
My.Settings.Default.WindowPosition = New Point(Me.Left, Me.Top)
My.Settings.Default.WindowSize = New Size(Me.Width, Me.Height)
My.Settings.Default.Save()
End Sub
B. Private Sub OnClosing(ByVal sender As Object, ByVal e As _
System.ComponentModel.CancelEventArgs)
Dim appKey As RegistryKey = _
Registry.CurrentUser.CreateSubKey("Software\EnterpriseApplication")
Dim settingsKey As RegistryKey = _
appKey.CreateSubKey("WindowSettings")
Dim windowPositionKey As RegistryKey = _
settingsKey.CreateSubKey("WindowPosition")
Dim windowSizeKey As RegistryKey = _
settingsKey.CreateSubKey("WindowSize")
windowPositionKey.SetValue("X", Me.Left)
windowPositionKey.SetValue("Y", Me.Top)
windowSizeKey.SetValue("Width", Me.Width)
windowSizeKey.SetValue("Height", Me.Height)
End Sub
C. Private Sub OnClosing(ByVal sender As Object, ByVal e As _
System.ComponentModel.CancelEventArgs)
Dim doc As New System.Xml.XmlDocument()
doc.Load("EnterpriseApplication.exe.config")
Dim nodePosition As System.Xml.XmlNode = _
doc.SelectSingleNode("//setting[@name='WindowPosition']")
nodePosition.ChildNodes(0).InnerText = String.Format("{0},{1}", _
Me.Left, Me.Top)
Dim nodeSize As System.Xml.XmlNode = _
doc.SelectSingleNode("//setting[@name='WindowSize']")
nodeSize.ChildNodes(0).InnerText = String.Format("{0},{1}", _
Me.Width, Me.Height)
doc.Save("UserConfigDistractor2.exe.config")
End Sub
D. Private Sub Window_Closing(ByVal sender As Object, ByVal e As _
System.ComponentModel.CancelEventArgs)
Dim sw As New StreamWriter("EnterpriseApplication.exe.config", True)
sw.WriteLine("<EnterpriseApplication.Properties.Settings>")
sw.WriteLine("<setting name=""WindowSize"" serializeAs=""String"">")
sw.WriteLine(String.Format("<value>{0},{1}</value>", Me.Width, _
Me.Height))
sw.WriteLine("</setting>")
sw.WriteLine("<setting name=""WindowPosition"" _
serializeAs=""String"">")
sw.WriteLine(String.Format("<value>{0},{1}</value>", Me.Left, _
Me.Top))
sw.WriteLine("</setting>")
sw.WriteLine("</UserConfigProblem.Properties.Settings>")
sw.Close()
End Sub
Answer: A

Microsoft인증   70-502-VB   70-502-VB
3. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application defines a BrowserWindow class. Each instance of the BrowserWindow class allows the
user to browse a Web site in a separate window. When a new browser window is opened, the user is
redirected to a predefined URL.
You write the following code segment.
01 Private Sub OpenNewWindow(ByVal sender As Object, _
02 ByVal e As RoutedEventArgs)
03 Dim newWindowThread As New Thread(New _
04 ThreadStart(AddressOf NewThreadProc))
05
06 newWindowThread.Start()
07 End Sub
08 Private Sub NewThreadProc()
09 10 End Sub
You need to ensure that the following requirements are met:
The main window of the application is not blocked when an additional browser window is created.
The application completes execution when the main window of the application is closed.
What should you do?
A. Insert the following code segment at line 05.
newWindowThread.SetApartmentState(ApartmentState.STA)
newWindowThread.IsBackground = True
Insert the following code segment at line 09.
Dim newWindow As New BrowserWindow()
newWindow.Show()
Dim app As New Application()
app.Run(newWindow)
B. Insert the following code segment at line 05.
newWindowThread.IsBackground = True
Insert the following code segment at line 09.
newWindowThread.SetApartmentState(ApartmentState.STA)
Dim newWindow As New BrowserWindow()
newWindow.Show()
Dim app As New Application()
app.Run(newWindow)
C. Insert the following code segment at line 05.
newWindowThread.SetApartmentState(ApartmentState.STA)
newWindowThread.IsBackground = False
Insert the following code segment at line 09.
Dim newWindow As New BrowserWindow()
System.Windows.Threading.Dispatcher.Run()
newWindow.Show()
D. Insert the following code segment at line 05.
newWindowThread.SetApartmentState(ApartmentState.STA)
newWindowThread.IsBackground = True
Insert the following code segment at line 09.
Dim newWindow As New BrowserWindow()
newWindow.Show()
System.Windows.Threading.Dispatcher.Run()
Answer: D

Microsoft   70-502-VB최신덤프   70-502-VB   70-502-VB자료   70-502-VB   70-502-VB

NO.7 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You add a CommandBinding element to the Window element. The command has a keyboard gesture
CTRL+H. The Window contains the following MenuItem control.
<MenuItem Header="Highlight Content"
Command="local:CustomCommands.Highlight" />
You need to ensure that the MenuItem control is disabled and the command is not executable when the
focus shifts to a TextBox control that does not contain any text.
What should you do?
A. Set the IsEnabled property for the MenuItem control in the GotFocus event handler for the TextBox
controls.
B. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
Private Sub Highlight_CanExecute(ByVal sender As Object, _
ByVal e As CanExecuteRoutedEventArgs)
Dim txtBox As TextBox = CType(sender, TextBox)
e.CanExecute = (txtBox.Text.Length > 0)
End Sub
C. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
Private Sub Highlight_CanExecute(ByVal sender As Object, _
ByVal e As CanExecuteRoutedEventArgs)
Dim txtBox As TextBox
txtBox = CType(e.Source, TextBox)
e.CanExecute = (txtBox.Text.Length > 0)
End Sub
D. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
Private Sub Highlight_CanExecute(ByVal sender As Object, _
ByVal e As CanExecuteRoutedEventArgs)
Dim Menu As MenuItem = CType(e.Source, MenuItem)
Dim txtBox As TextBox = CType(Menu.CommandTarget, TextBox)
Menu.IsEnabled = (txtBox.Text.Length > 0)
End Sub
Answer: C

Microsoft   70-502-VB   70-502-VB   70-502-VB

NO.8 You are creating a Windows Presentation Foundation (WPF) application by using Microsoft .NET
Framework 3.5.
The WPF application has a Grid control named rootGrid.
You write the following XAML code fragment.
<Window x:Class="MCP.HostingWinFormsControls"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/
presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="HostingWinFormsControls"
Loaded="Window_Loaded">
<Grid x:Name="rootGrid">
</Grid>
</Window>
You need to ensure that each time the WPF window opens, a Windows Forms control named
MyCustomFormsControl is added to rootGrid.
Which code segment should you use?
A. Private Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim host As New WindowsFormsHost()
Dim formsControl As New MyCustomFormsControl()
host.Child = formsControl;
rootGrid.Children.Add(host);
End Sub
B. Private Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim host As New ElementHost()
Dim formsControl As New MyCustomFormsControl()
host.Child = formsControl;
rootGrid.Children.Add(host);
End Sub
C. Private Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim formsControl As New MyCustomFormsControl()
formsControl.CreateControl()
Dim target As New HwndTarget(formsControl.Handle)
Dim formsElement As UIElement = TryCast(target.RootVisual, _
UIElement)
rootGrid.Children.Add(formsElement)
End Sub
D. Private Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim formsControl As New MyCustomFormsControl()
formsControl.CreateControl()
Dim source As HwndSource = HwndSource.FromHwnd(formsControl.Handle)
Dim formsElement As UIElement = TryCast(source.RootVisual, _
UIElement)
rootGrid.Children.Add(formsElement)
End Sub
Answer: A

Microsoft기출문제   70-502-VB   70-502-VB   70-502-VB최신덤프

NO.9 You are creating a Windows Presentation Foundation application.
You create a window for the application. The application contains an audio file named
AudioFileToPlay.wav.
You need to ensure that the following requirements are met:
The audio file is played each time you click the client area of the window.
The window provides optimal performance when the audio file is being played.
What should you do?
A. Add the following XAML line of code to the window.
<MediaElement Source="AudioFileToPlay.wav" />
B. Add the following code segment to the window constructor method in the code-behind file.
Dim player As New SoundPlayer()
player.SoundLocation = "AudioFileToPlay.wav"
player.Play()
C. Add the following code segment to the window MouseDown method in the code-behind file.
Dim player As New MediaElement()
player.Source = New Uri("AudioFileToPlay.wav", UriKind.Relative)
player.LoadedBehavior = MediaState.Manual
player.Play()
D. Add the following XAML code fragment to the window.
<Window.Triggers>
<EventTrigger RoutedEvent="Window.MouseDown">
<EventTrigger.Actions>
<SoundPlayerAction Source="AudioFileToPlay.wav"/>
</EventTrigger.Actions>
</EventTrigger>
</Window.Triggers>
Answer: D

Microsoft기출문제   70-502-VB pdf   70-502-VB

NO.10 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You create a window for the application.
You need to ensure that the following requirements are met:
An array of strings is displayed by using a ListBox control in a two-column format.
The data in the ListBox control flows from left to right and from top to bottom.
What should you do?
A. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<UniformGrid Columns="2"/>
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following VB.net code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString
B. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following vb.net code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString
C. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<WrapPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following vb.net code to associate the array of strings to the ListBox control.
myListView.ItemsSource = arrayOfString
D. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition />
<ColumnDefinition />
</Grid.ColumnDefinitions>
</Grid>
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following vb.net code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString
Answer: A

Microsoft   70-502-VB   70-502-VB기출문제

NO.11 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application contains a data source and a TextBox control named txtUnitPrice. The Text property of
the txtUnitPrice control is bound to the data source by using two-way binding.
You write the following code segment.
01 Private Sub OverridePrice(ByVal newPrice As Decimal)
02
03 txtUnitPrice.Text = newPrice
04 End Sub
You need to ensure that after the OverridePrice method is called, changes to the data source do not
propagate to txtUnitPrice.
Which code segment should you insert at line 02?
A. txtUnitPrice.Clear()
B. txtUnitPrice.DataContext = Nothing
C. BindingOperations.ClearBinding(txtUnitPrice, TextBox.TextProperty)
D. Dim binding As Binding = BindingOperations.GetBinding(txtUnitPrice, _
TextBox.TextProperty)
binding.NotifyOnSourceUpdated = False
Answer: C

Microsoft   70-502-VB   70-502-VB

NO.12 You have created a Windows Presentation Foundation application by using Microsoft .NET Framework

NO.13 You are creating a Windows Presentation Foundation (WPF) application by using Microsoft .NET
Framework 3.5.
The application contains a window that programatically displays an image. The window contains a Grid
control named theGrid. You write the following code segment. (Line numbers are included for reference
only.)
09 theGrid.Children.Add(theImage);
01 Dim theImage As New Image()
02 theImage.Width = 200
03 Dim theBitmapImage As New BitmapImage()
04 theBitmapImage.BeginInit()
05 theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
06 theBitmapImage.DecodePixelWidth = 200
07 theBitmapImage.EndInit()
08
09 theGrid.Children.Add(theImage)
You need to crop an elliptical region of the image such that the ellipse is centered at the location X=75
and Y=50.
Which code segment should you insert at line 08?
A. Dim croppedBitmap As New CroppedBitmap(theBitmapImage, _
New Int32Rect(75, 50, 105, 50))
theImage.Source = theBitmapImage
B. Dim croppedBitmap As New CroppedBitmap()
croppedBitmap.Source = theBitmapImage
croppedBitmap.SourceRect = New Int32Rect(75, 50, 105, 50)
theImage.Source = theBitmapImage
C. theImage.Source = theBitmapImage
Dim clipGeometry As New EllipseGeometry(New Point(75, 50), 50, 25)
theImage.Clip = clipGeometry
D. theImage.Source = theBitmapImage
Dim clipGeometry As New EllipseGeometry()
clipGeometry.Center = New Point(75, 50)
theImage.Clip = clipGeometry
Answer: C

Microsoft   70-502-VB   70-502-VB기출문제   70-502-VB dump   70-502-VB pdf

NO.14 You create a form by using Windows Presentation Foundation and Microsoft .NET Framework 3.5. The
form contains a status bar.
You plan to add a ProgressBar control to the status bar.
You need to ensure that the ProgressBar control displays the progress of a task for which you cannot
predict the completion time.
Which code segment should you use?
A. progbar.IsIndeterminate = True
B. progbar.IsIndeterminate = False
C. progbar.HasAnimatedProperties = True
D. progbar.HasAnimatedProperties = False
Answer: A

Microsoft최신덤프   70-502-VB   70-502-VB dumps   70-502-VB   70-502-VB

NO.15 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5. Your project contains a folder named Data.
You add a .MP3 file named song.mp3 in the Data folder. You set the Build Action property of the
application to Resource.
You need to access the .MP3 file from one of the application classes.
Which code segment should you use?
A. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.GetContentStream(uri)
Dim stream As Stream = sri.Stream
B. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.LoadComponent(uri)
Dim stream As Stream = sri.Stream
C. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.GetRemoteStream(uri)
Dim stream As Stream = sri.Stream
D. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.GetResourceStream(uri)
Dim stream As Stream = sri.Stream
Answer: D

Microsoft자격증   70-502-VB   70-502-VB   70-502-VB덤프

NO.16 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application has a window that programatically displays an image. The window contains a grid named
theGrid.
The window displays images in their actual size. You want the images to be 200 pixels wide. You write the
following code segment.
01 Dim theImage As New Image()
02 theImage.Width = 200
03 Dim theBitmapImage As New BitmapImage()
04
05 theImage.Source = theBitmapImage
06 theGrid.Children.Add(theImage)
You need to ensure that the application meets the following requirements:
The window uses the least amount of memory to display the image.
The image is not skewed.
Which code segment should you insert at line 04?
A. theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage.DecodePixelWidth = 200
B. theBitmapImage.BeginInit()
theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage. End Init()
C. theBitmapImage.BeginInit()
theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage.DecodePixelWidth = 200
theBitmapImage. End Init()
D. theBitmapImage.BeginInit()
theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage. End Init()
theBitmapImage.DecodePixelWidth = 200
theBitmapImage.DecodePixelHeight = 200
Answer: C

Microsoft dump   70-502-VB자격증   70-502-VB   70-502-VB

NO.17 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The XAML page for the application will display employee information from an XML file. The following code
fragment is an excerpt from the XML file.
<Employee>
<Manager FirstName="Adam" LastName="Barr" Photo="E1.jpg"/>
<Engineer FirstName="Mu" LastName="Han" Photo="E2.jpg"/>
...
</Employee>
The file is exposed as a resource named employees.
You add the following templates under the Window.Resources element.
<DataTemplate x:Key="Manager">
<Image Source="{Binding XPath=@Photo}" Height="50"/>
</DataTemplate>
<DataTemplate x:Key="Engineer">
<Image Source="{Binding XPath=@Photo}" Height="40"/>
</DataTemplate>
You need to ensure that the selection of templates is dependent on the XML element being rendered.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following ListBox control to the XAML code fragment for the window.
<ListBox ItemsSource="{Binding
Source={StaticResource employees}, XPath=/Employee/*}"/>
B. Add the following template to the Windows.Resources element.
<HierarchicalDataTemplate x:Key="Employee" ItemsSource=
"{Binding XPath=/Employee/*}">
<TextBlock Text="Employees" FontSize="20" />
</HierarchicalDataTemplate>
C. Add the following template to the Windows.Resources element.
<HierarchicalDataTemplate x:Key="Employee" ItemsSource=
"{Binding XPath=*}">
<TextBlock Text="Employees" FontSize="20" />
</HierarchicalDataTemplate>
D. Add the following ListBox control to the XAML code fragment for the page.
<ListBox ItemsSource="{Binding Source=
{StaticResource employees}, XPath=/Employee/*}">
<ListBox.ItemTemplateSelector>
<local:EmployeeTemplateSelector
xmlns:local="clr-namespace:AppNamespace"/>
</ListBox.ItemTemplateSelector>
</ListBox>
E. Add the following class to the code-behind file.
Public Class EmployeeTemplateSelector
Inherits DataTemplateSelector
Public Overloads Overrides Function _
SelectTemplate(ByVal item As Object, _
ByVal container As DependencyObject) As DataTemplate
Dim data As XmlElement = TryCast(item, XmlElement)
Return TryCast(DirectCast(container, _
FrameworkElement).FindResource(data.LocalName), DataTemplate)
End Function
End Class
Answer: D AND E

Microsoft   70-502-VB   70-502-VB   70-502-VB자격증

NO.18 You are creating Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application has a TreeView class that builds the directory tree for a given directory.
You write the following class that represents a directory.
Class Folder
Public ReadOnly Property Name() As String
Get
...
End Get
End Property
Public ReadOnly Property Subfolders() As List(Of Folder)
Get
...
End Get
End Property
End Class
You write the following code segment. (Line numbers are included for reference only.)
01 Dim tree As New TreeView()
02 Dim folder As New Folder("C:\")
03
04 Dim labelFactory As New
05 FrameworkElementFactory(GetType(TextBlock))
06
07 template.VisualTree = labelFactory
08 tree.ItemTemplate = template
09 tree.ItemsSource = folder.Subfolders
You need to ensure that the TreeView class displays nodes that correspond to the child folders of the C:\
drive.
Which code segments should you insert at lines and 06?
A. 1. Insert the following code segment at line 03.
Dim template As New HierarchicalDataTemplate(folder)
template.ItemsSource = New Binding("Subfolders")
2. Insert the following code segment at line 06.
labelFactory.SetBinding(TextBlock.TextProperty, New Binding("Name"))
B. 1. Insert the following code segment at line 03.
Dim template As New HierarchicalDataTemplate(GetType(Folder))
template.ItemsSource = New Binding("Subfolders")
2. Insert the following code segment at line 06.
labelFactory.SetBinding(TextBlock.TextProperty, New Binding("Name"))
C. 1. Insert the following code segment at line 03.
Dim template As New HierarchicalDataTemplate("Folder")
template.ItemsSource = New Binding("Name")
2. Insert the following code segment at line 06.
labelFactory.SetBinding(TextBlock.TextProperty, _
New Binding("Subfolders"))
D. 1. Insert the following code segment at line 03.
Dim template As New HierarchicalDataTemplate("Folder")
template.ItemsSource = New Binding("Folder.Subfolders")
2. Insert the following code segment at line 06.
labelFactory.SetBinding(TextBlock.TextProperty, _
New Binding("Folder.Name"))
Answer: B

Microsoft   70-502-VB시험문제   70-502-VB   70-502-VB

NO.19 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application will display documents by using an instance of the FlowDocumentPageViewer class. The
instance is named fdpv. Users can highlight and annotate the content of the documents.
You need to ensure that annotations made to a document are saved and rendered when the document is
displayed again.
Which code segment should you use?
A. Protected Sub OnTextInput(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
Dim store As AnnotationStore = _
New XmlStreamStore(AnnotationStream)
service.Enable(store)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Store.Flush()
service.Disable()
AnnotationStream.Close()
End If
End Sub
B. Protected Sub OnLoaded(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Store.Flush()
service.Disable()
AnnotationStream.Close()
End If
End Sub
C. Protected Sub OnLoaded(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
Dim store As AnnotationStore = New _
XmlStreamStore(AnnotationStream)
service.Enable(store)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Store.Flush()
service.Disable()
AnnotationStream.Close()
End If
End Sub
D. Protected Sub OnLoaded(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
Dim store As AnnotationStore = New _
XmlStreamStore(AnnotationStream)
service.Enable(store)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Disable()
AnnotationStream.Close()
End If
End Sub
Answer: C

Microsoft dump   70-502-VB   70-502-VB   70-502-VB최신덤프   70-502-VB자료

NO.20 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You write the following code segment (Line numbers are included for reference only).
01 Dim content As Object
02 Dim fileName As String = "theFile"
03 Using xamlFile As New FileStream(fileName & ".xaml", _
04 FileMode.Open, FileAccess.Read)
06 content = TryCast(XamlReader.Load(xamlFile), Object)
07 End Using
08 Using container As Package = Package.Open(fileName & ".xps", _
09 FileMode.Create)10 11 End Using
You need to ensure that the following requirements are met:
The application converts an existing flow document into an XPS document.
The XPS document is generated by using the flow document format.
The XPS document has the minimum possible size.
Which code segment should you insert at line 10?
A. Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As XpsSerializationManager = New _
System.Windows.Xps.XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
rsm.SaveAsXaml(paginator)
End Using
B. Using xpsDoc As New XpsDocument(container, _CompressionOption.SuperFast)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
rsm.Commit()
End Using
C. Using xpsDoc As New XpsDocument(container, _CompressionOption.Maximum)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
Dim paginator As DocumentPaginator = (CType(content, _
IDocumentPaginatorSource)).DocumentPaginator
rsm.SaveAsXaml(paginator)
End Using
D. Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
Dim paginator As DocumentPaginator = (CType(content, _
IDocumentPaginatorSource)).DocumentPaginator
rsm.SaveAsXaml(paginator)
End Using
Answer: C

Microsoft dump   70-502-VB dumps   70-502-VB

ITExamDump 에서 제공해드리는 Microsoft인증70-502-VB시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. Microsoft인증70-502-VB시험은ITExamDump 표Microsoft인증70-502-VB덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.