지금 같은 상황에서 몇년간EMC E20-885시험자격증만 소지한다면 일상생활에서많은 도움이 될것입니다. 하지만 문제는 어떻게EMC E20-885시험을 간단하게 많은 공을 들이지 않고 시험을 패스할것인가이다? 우리ITExamDump는 여러분의 이러한 문제들을 언제드지 해결해드리겠습니다. 우리의E20-885시험마스터방법은 바로IT전문가들이제공한 시험관련 최신연구자료들입니다. 우리ITExamDump 여러분은E20-885시험관련 최신버전자료들을 얻을 수 있습니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.
ITExamDump는 여러분을 성공으로 가는 길에 도움을 드리는 사이트입니다. ITExamDump에서는 여러분이 안전하게 간단하게EMC인증E20-885시험을 패스할 수 있는 자료들을 제공함으로 빠른 시일 내에 IT관련지식을 터득하고 한번에 시험을 패스하실 수 있습니다.
우리ITExamDump에는 아주 엘리트한 전문가들로 구성된 팀입니다. 우리는 아주 정확하게 또한 아주 신속히EMC E20-885관한 자료를 제공하며, 업데이트될경우 또한 아주 빠르게 뉴버전을 여러분한테 보내드립니다. ITExamDump는 관련업계에서도 우리만의 브랜드이미지를 지니고 있으며 많은 고객들의 찬사를 받았습니다. 현재EMC E20-885인증시험패스는 아주 어렵습니다, 하지만 ITExamDump의 자료로 충분히 시험 패스할 수 있습니다.
우리ITExamDump 사이트에서EMC E20-885관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다.빨리 우리 ITExamDump의 덤프를 만나보세요.
ITExamDump는 여러분이EMC 인증E20-885인증시험 패스와 추후사업에 모두 도움이 되겠습니다. ITExamDump제품을 선택함으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트 버전을 받을수 있는 기회를 얻을수 있습니다. EMC 인증E20-885 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이 시험에서 성공할수 있습니다. ITExamDump시험문제와 답이야 말로 퍼펙트한 자료이죠. ITExamDump EMC 인증E20-885인증시험자료는 100% 패스보장을 드립니다.
시험 번호/코드: E20-885
시험 이름: EMC (VNX Solutions Expert Exam for Implementation Engineers)
E20-885 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-885.html
NO.1 An administrator is attempting to vMotion a VM from one vSphere ESXi 5.0 host to another. The ESXi
servers are connected to three VNX arrays on the fabric. The vMotion fails. What is the most likely
reason?
A. RDMs are attached to the VM with different host LUN numbers on the ESXi servers.
B. There are active SnapView sessions on the VM preventing the vMotion.
C. RDMs are in physical compatibility mode and not eligible for vMotion.
D. There are active MirrorView sessions on the VM preventing the vMotion.
Answer: A
EMC E20-885 E20-885 E20-885최신덤프
NO.2 A customer requests a performance review of their EMC VNX before FAST Cache is implemented.
You notice a dedicated LUN has a write size of 4 KB, and the disks are performing writes of 8 KB. What is
causing this behavior?
A. Coalescing
B. Pre-fetching
C. Flushing
D. Promotion
Answer: A
EMC자료 E20-885자료 E20-885
NO.3 A customer wants to replicate a CIFS environment from a legacy EMC Celerra to a new EMC VNX.
Users are able to access CIFS shares from both arrays. The CIFS shares are on different networks and
replication is not running. The customer wants to make sure there will be no network restrictions
preventing replication between the data movers on two different networks.
What TCP ports should they ask the network team to open?
A. 8888, 8887, 5081
B. 80, 443, 8080
C. 5057, 445, 5087
D. 23, 25, 22
Answer: A
EMC최신덤프 E20-885 dump E20-885자격증 E20-885
NO.4 Click on the calculator icon in the upper left-hand corner.
A SQL database requires 1,000 I/O per second with 85% reads and 15% writes. If RAID 1/0 is used, what
is the total number of spindles required to generate the required I/O per second?
A. Ten 10K drives
B. Four 15K drives
C. One Flash drive
D. Fourteen 7.2K drives
Answer: A
EMC E20-885 E20-885 dump E20-885시험문제
NO.5 A customer has two identically configured Linux hosts (OS version, memory, CPU) attached to the
same network. One host is NFS-attached and the other is FC-attached to an EMC VNX. Both the NFS file
systems and the SAN LUNs are created from four RAID 5 (4+1) RAID groups. LUNs are not shared
between file and block.
The customer reports NFS-attached host is able to achieve much greater throughput via NFSv4 versus
the FC-attached host.
What is the source of the performance difference between the file and block configurations?
A. FC encapsulation overhead
B. I/O size
C. Host Patch levels
D. NFS version
Answer: B
EMC자격증 E20-885시험문제 E20-885
NO.6 A customer has two EMC VNX configured to replicate between sites. Each VNX has dual Control
Stations. The primary Control Station at the source site fails at 6 p.m. and reboots. At 8 p.m., the customer
completes DR testing and observes CIFS replication does not failover to the target site VNX. Why does
CIFS replication not failover to the target VNX during the DR test?
A. The control station of the primary VNX should have been failed back.
B. The control station of the second VNX should have been failed over.
C. The control station of the primary VNX should have IP bounding enabled.
D. The control station of the secondary VNX should have IP bounding enabled.
Answer: A
EMC덤프 E20-885덤프 E20-885 E20-885 pdf
NO.7 A storage administrator reports they are unable configure SAN Copy connections between two VNX.
The required cabling is in place and zoning is correct, but the SP connections still do not appear in
Unisphere Manager. What could have caused this issue?
A. SAN Copy is not installed on both VNX arrays.
B. SAN Copy is only licensed for local copies.
C. The SP ports are already being used by hosts.
D. Both VNX arrays are not in the same domain.
Answer: D
EMC자료 E20-885 dumps E20-885
NO.8 A Pool used for FAST VP has the following configuration:
Flash drives: 1,000 GB, with 1,000 GB free
SAS drives: 5,000 GB, with 2,500 GB free
NL-SAS drives: 20,000 GB, with 11,500 GB free
The tiering policy is set to Auto. An additional 600 GB of new data is written to the Pool.
What is the data distribution after the data is written?
A. Flash drives: 960 GB free SAS drives: 2,400 GB free NL-SAS drives: 11,040 GB free
B. Flash drives: 400 GB free SAS drives: 2,500 GB free NL-SAS drives: 11,500 GB free
C. Flash drives: 900 GB free SAS drives: 2,000 GB free NL-SAS drives: 11,500 GB free
D. Flash drives: 970 GB free SAS drives: 2,350 GB free NL-SAS drives: 11,080GB free
Answer: A
EMC기출문제 E20-885 dumps E20-885덤프 E20-885 E20-885최신덤프
NO.9 A customer requires an asynchronous DR solution for an NFS-only client environment. The customer
wants the solution to be simple to implement. It was recommended they create a single NIS domain, and
use several NIS servers to provide centralized authentication to the NFS clients at both the source and
destination sites. The customer asks you whether they should consider using VDMs in this environment.
What do you advise?
A. VDMs would offer no advantages to this environment.
B. VDMs allow VMWare integration of NFS service environments.
C. VDMs eliminate the need for Usermapper in NFS environments.
D. VDMs allow for assignment of specific CPUs to a NFS server.
Answer: A
EMC E20-885 E20-885
NO.10 A customer has a Windows-only environment connected to an EMC VNX for File at their main campus
site. The customer plans to install a new EMC VNX at a remote branch office site. The new VNX will be
used to implement a DR solution for their main campus VNX using several deduplicated file systems
shared and available to clients via CIFS.
Which solution do you recommend to the customer?
A. Use VNX Replicator to replicate the VNX VDMs and associated file systems from the main campus site
to the VNX system at the branch office site to provide an asynchronous DR solution.
B. Use VNX Replicator to replicate the VNX VDMs and associated file systems from the main campus site
to the VNX system at the branch office site to provide a synchronous DR solution.
C. Use VNX SAN Copy to replicate the VNX block devices associated with the VNX file systems from the
main campus site to the VNX system at the branch office site to provide a synchronous DR solution.
D. Use VNX MirrorView/A to replicate the VNX block devices associated with the VNX file systems from
the main campus site to the VNX system at the branch office site to provide an asynchronous DR solution.
Answer: A
EMC최신덤프 E20-885 pdf E20-885 E20-885
NO.11 A customer recently upgraded from vSphere v4.x to vSphere v5.0 to benefit from new VMFS-5 features
for their existing DataStore1 ¯ and DataStore2 ¯ datastores on an EMC VNX. A second identically
configured VNX was implemented and the customer created two additional datastores on the new VNX.
After monitoring the environment, the customer notices the VMs on DataStore1 ¯ and DataStore2 ¯
are not using the same sub-block structure as the two new datastores.
What is the reason for this behavior.?
A. The old VMs are on an upgraded VMFS-5 datastore.
B. The old VMs are still running old VMware tools.
C. The new VMFS-5 features need to be licensed and activated.
D. The new VMFS-5 cannot support two VNX storage systems.
Answer: A
EMC자격증 E20-885 dump E20-885자격증 E20-885 E20-885인증
NO.12 A system administrator wants to migrate medical-imaging data stored on an EMC VNX. The host
connects to the VNX via iSCSI. The IP SAN infrastructure has recently been updated to support 1 Gb/10
GB switching. The system administrator wants to maximize data transfer performance. What would you
recommend?
A. Implement 10 Gb/s iSCSI connection using a 9000 byte frame.
B. Use a 4 KB memory page size.
C. Implement 10 Gb/s iSCSI connection using a 2400 byte frame.
D. Increase the write-aside value.
Answer: A
EMC E20-885 E20-885 E20-885자격증
NO.13 You are planning a CIFS DR solution for two existing EMC VNX. Each VNX has dual Control Stations.
Each VNX is also configured for a RecoverPoint protection solution on other VNX LUNs that are non-file
related. What recommendation would you give the customer concerning the CIFS DR solution?
A. Configure IP aliasing on the Control Stations for both source and destination VNX systems before
configuring VNX Replicator
B. Configure IP aliasing on the Control Stations for both source and destination VNX systems after
configuring VNX Replicator
C. Configure IP aliasing on the source VNX system Control Stations before configuring VNX Replicator,
and then configure IP aliasing on the destination VNX system Control Stations after configuring VNX
Replicator.
D. Configure IP aliasing on the source VNX system Control Stations before configuring VNX Replicator
and use RecoverPoint to provide protection of the source VNX Control Stations to the destination VNX.
Answer: A
EMC E20-885자격증 E20-885자격증 E20-885인증
NO.14 A customer recently purchased an EMC VNX to be connected to four ESXi 5.0 hosts via FC. Five of the
associated VMs (virtual machines) are running SQL Server 2008 R2. To avoid contention, the customer
wants the VM's database and log drives on separate datastores.
Which ESXi 5.0 feature would satisfy this requirement?
A. Network interface card teaming
B. Virtual Machine Anti-Affinity
C. Raw Device Mappings
D. VMDK Affinity
Answer: B
EMC덤프 E20-885최신덤프 E20-885 E20-885 E20-885자료
NO.15 A customer has a CIFS DR solution with EMC VNX using a One-to-Many replication topology. The
customer asks you to explain replication behavior under the following conditions:
Production site failover or switchover to a DR site
Replication start and reverse is performed
What would you advise the customer?
A. The original production site remains a One-to-Many replication source for the other remaining DR sites.
B. All remaining replications sessions to the other DR sites are suspended.
C. The original production site goes into cascade mode to remain a replication source for the remaining
DR sites.
D. The DR site becomes the replication source for the remaining DR sites and the original production site
is marked as invalid.
Answer: C
EMC최신덤프 E20-885 E20-885덤프 E20-885 dump
NO.16 A customer has two identically configured Linux hosts (OS version, memory, CPU) attached to the
same network. One host is NFS-attached and the other is FC-attached to an EMC VNX. Both the NFS file
systems and the SAN LUNs are created from four RAID 5 (4+1) RAID groups. LUNs are not shared
between file and block and each host generates the same size I/O.
The customer reports the FC-attached host is able to achieve much greater throughput than the
NFS-attached host.
What is the source of the performance difference between the file and block configurations?
A. FC encapsulation overhead
B. Host Patch levels
C. Ethernet Network
D. NFS version
Answer: C
EMC E20-885 E20-885 E20-885인증 E20-885
NO.17 A customer has an Oracle ASM database on an EMC VNX with FAST Suite enabled. They observe
intermittent performance degradation due to momentary data hot spots caused by bursty transaction rates.
What recommendation would you make to help alleviate these hot spots?
A. Enable Fast VP on the ASM LUNs
B. Modify the ASM rebalance power priority
C. Enable Fast Cache on the ASM LUNs
D. Disable ASM storage management
Answer: C
EMC인증 E20-885 E20-885자격증 E20-885 E20-885
NO.18 A client has an EMC VNX configured with four storage ports, four 15-drive DAEs (disk array
enclosures) and a total of forty drives (20 NL-SAS and 20 SAS drives). The client is using RAID 5 (4+1)
RAID groups with a traditional LUN configuration.
What is the recommended SAS LCC port configuration for optimal performance?
A. Distribute drives evenly across all ports
B. Distribute drives on all odd ports
C. Distribute drives on all even ports
D. Distribute drives on a single port
Answer: A
EMC E20-885 E20-885 E20-885시험문제 E20-885시험문제
NO.19 A customer plans to connect ESXi 5.0 hosts to a new EMC VNX array. They want to take advantage of
the hardware-assisted locking feature in VAAI. Which is a feature of hardware-assisted locking?
A. Locking at the block level of a logical unit
B. Locking the LUN instead of the block level
C. Accessing a block from multiple hosts at the same time
D. Automatic enabling of safe data caching
Answer: A
EMC E20-885시험문제 E20-885 pdf E20-885자격증 E20-885덤프
NO.20 A customer has two EMC VNX, one at the primary site and the other at a DR site located 100 km away.
The WAN connection between sites is a 100 Mb/s dark fiber link with 4 ms latency.
A previous storage administrator configured the pool LUNs for the file system on thin LUNs. The file
system is growing at a rate of 500 GB per week and is on a VDM. The new storage administrator reports
performance issues with the file system.
What is the most likely reason for the performance issue?
A. Thin LUNs are used for the file system.
B. The WAN link should be upgraded to an eLAN.
C. The VNX system requires an upgrade.
D. The file system has too many concurrent users connected.
Answer: A
EMC E20-885최신덤프 E20-885 E20-885덤프
EMC인증 E20-885시험을 가장 빠른 시일내에 가장 쉬운 방법으로 패스하는 방법을 고심초사한끝에 ITExamDump에서 연구해 내었습니다. 그건 바로ITExamDump의EMC인증 E20-885덤프로EMC인증 E20-885시험에 대비하는것입니다. ITExamDump의EMC인증 E20-885덤프품질을 검증하려면 구매사이트의 무료샘플을 체험해보시면 됩니다.자격증을 많이 취득하여 멋진 IT전문가로 되세요.
댓글 없음:
댓글 쓰기