SCO 090-077 인증시험

SCO인증 090-077시험은 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은ITExamDump가 도와드립니다. ITExamDump의 SCO인증 090-077덤프만 공부하면 시험패스에 자신이 생겨 불안한 상태에서 벗어날수 있습니다.덤프는 시장에서 가장 최신버전이기에 최신 시험문제의 모든 시험범위와 시험유형을 커버하여SCO인증 090-077시험을 쉽게 패스하여 자격증을 취득하여 찬란한 미래에 더 가깝도록 도와드립니다.

ITExamDump는 전문적인 IT인증시험덤프를 제공하는 사이트입니다.090-077인증시험을 패스하려면 아주 현병한 선택입니다. ITExamDump에서는090-077관련 자료도 제공함으로 여러분처럼 IT 인증시험에 관심이 많은 분들한테 아주 유용한 자료이자 학습가이드입니다. ITExamDump는 또 여러분이 원하도 필요로 하는 최신 최고버전의090-077문제와 답을 제공합니다.

시험 번호/코드: 090-077
시험 이름: SCO (UNIXWARE 7 ACE RECERTIFICATION V10A1)

SCO 090-077인증은 아주 중요한 인증시험중의 하나입니다. ITExamDump의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 IT관연인증시험 자격증자료들입니다. 이런 자료들은 여러분이SCO인증시험중의090-077시험을 안전하게 패스하도록 도와줍니다. ITExamDump에서 제공하는 덤프들은 모두 100%통과 율을 보장하며 그리고 일년무료 업뎃을 제공합니다

SCO인증 090-077시험취득 의향이 있는 분이 이 글을 보게 될것이라 믿고ITExamDump에서 출시한 SCO인증 090-077덤프를 강추합니다. ITExamDump의SCO인증 090-077덤프는 최강 적중율을 자랑하고 있어 시험패스율이 가장 높은 덤프자료로서 뜨거운 인기를 누리고 있습니다. IT인증시험을 패스하여 자격증을 취득하려는 분은ITExamDump제품에 주목해주세요.

090-077 덤프무료샘플다운로드하기: http://www.itexamdump.com/090-077.html

NO.1 Which statement is false?
A. The vxfs filesystem supports the creation of 2 terabyte file sizes by default.
B. The vxfs filesytem supports the creation of up to 2 gigabyte file sizes by default.
C. The vxfs filesystem supports a 4 kilobyte logical block size.
D. The vxfs filesystem supports an 8 kilobyte logical block size.
Answer: A

SCO   090-077   090-077

NO.2 Every UnixWare 7 system with TCP/IP has a network routing table within the kernel. Which field is NOT
contained in a routing table entry?
A. Netmask
B. Broadcast Address
C. Destination IP address
D. Network interface
Answer: B

SCO   090-077   090-077   090-077인증

NO.3 Which command line creates a character special device file with a major number=19 and a minor
number=1?
A. mknod /dev/devicename c 19 1
B. mknod /dev/devicename c 1 19
C. mkdev /dev/devicename c 19 1
D. mkdev /dev/devicename c 1 19
Answer: A

SCO   090-077기출문제   090-077 pdf   090-077   090-077시험문제

NO.4 How many detected hard disks can you create partitions and filesystems on during the installation of
the UnixWare 7 operating system?
A. Eight (8)
B. Six (6)
C. Four (4)
D. Two (2)
Answer: D

SCO시험문제   090-077   090-077자격증   090-077   090-077

NO.5 Which answer describes the correct order in which diskadd (1M) invokes commands to configure
additional disks?
A. fdisk (1M), mkfs (1M0, and disksetup (1M)
B. disksetup (1M), fdisk (1M), and mkfs (1M)
C. fdisk (1M), disksetup (1M), and mkfs (1M)
D. None of the above.
Answer: C

SCO   090-077   090-077인증   090-077덤프

NO.6 In which file can you add or change default boot parameters?
A. /stand/bfs.blm
B. /stand/boot
C. /stand/smallfs.blm
D. /stand/stage3.blm
Answer: B

SCO   090-077 dumps   090-077   090-077 dumps   090-077

NO.7 How many hard disk slices are created by default?
A. 16
B. 32
C. 64
D. 128
Answer: A

SCO자료   090-077인증   090-077   090-077

NO.8 If it exists, in which hard disk slice is the PDINFO (Physical Disk Information) stored?
A. The boot slice
B. The dump slice
C. The var slice
D. The volume management public slice
Answer: C

SCO   090-077   090-077   090-077자격증

NO.9 How many partitions can you define on the first hard disk during the installation of the UnixWare 7
operating system?
A. One (1)
B. Two (2)
C. Three (3)
D. Four (4)
Answer: D

SCO   090-077   090-077 dump   090-077

NO.10 Which command can you use to display the attributes of any disk device?
A. devattr (1M)
B. displaypkg (1M)
C. diskcfg (1M)
D. dodisk (1M)
Answer: A

SCO자료   090-077   090-077   090-077 pdf   090-077

NO.11 Which three port monitors are provided on UnixWare 7 systems?
A. init (1M), liload (1M), and ttyadm (1M)
B. init (1M), liload (1M), and ttymap (1M)
C. init (1M), llistat (1M), and ttyadm (1M)
D. inetd (1Mtcp), listen (1M), and ttymon (1M)
Answer: D

SCO   090-077   090-077   090-077최신덤프

NO.12 Which two serial device files support software flow control?
A. /dev/term/00m and /dev/term/00h
B. /dev/term/00m and /dev/term/00s
C. /dev/term/00m and /dev/term/00t
D. /dev/term/00s and /dev/term/00t
Answer: D

SCO   090-077 pdf   090-077인증   090-077

NO.13 When running the fdisk (1M) command and selecting se whole disk for UNIX, which statement is true?
A. Any existing partitions are destroyed and the UNIX partition is marked active.
B. Any existing partitions are destroyed and you must manually activate the partition.
C. Any existing partitions are NOT destroyed and the UNIX partition is marked active.
D. Any existing partitions are NOT destroyed and you must manually activate the partition.
Answer: A

SCO인증   090-077   090-077인증

NO.14 Which serial communications ports does UnixWare 7 recognize by default ?
A. COM 1 only
B. COM 2 only
C. COM1 and COM2
D. COM1, COM2, COM3, and COM4
Answer: D

SCO   090-077   090-077인증   090-077자격증   090-077

NO.15 Which file controls the re-use of a user ID?
A. /etc/skel/ageduid
B. /etc/default/idage
C. /etc/security/ia/ageduid
D. There is not a file that controls the re-use of a user ID. After a user is deleted it is not possible to re-use
an ID.
Answer: C

SCO자료   090-077   090-077 dumps   090-077 pdf   090-077최신덤프

NO.16 Which command do you use to create a set of emergency floppy diskettes?
A. diskadd (1M)
B. disksetup (1M)
C. emergency_disk (1M)
D. emergency_rec (1M)
Answer: C

SCO   090-077   090-077자격증

NO.17 Which of the following can you NOT use the Boot Command Processor (BCP) to accomplish?
A. Display or change default boot parameters
B. Enter single-user state
C. Load another UNIX kernel
D. Start the print service
Answer: D

SCO dump   090-077시험문제   090-077

NO.18 Which of the following actions occur when you choose se default disk operations?during the installation
of UnixWare 7?
A. A new boot sector installs, the disk is NOT scanned for bad blocks, and the disk geometry is NOT
configured.
B. A new boot sector installs, the disk is scanned for bad blocks, and the disk geometry is configured.
C. A new boot sector installs, the disk is scanned for bad blocks, and the disk geometry is NOT
configured.
D. A new boot sector installs, the disk is NOT scanned for bad blocks, and the disk geometry is
configured.
Answer: A

SCO   090-077 dump   090-077

NO.19 Which command can you use to check the accuracy of installed files and compare them to the
contents of the /var/sadm/install/contents file?
A. pkgadd (1M)
B. pkgchk (1M)
C. pkginfo (1M)
D. pkgtrans (1M)
Answer: B

SCO인증   090-077   090-077   090-077 dump   090-077

NO.20 What is the maximum vxfs (VERITAS) filesystem size?
A. 2 terabytes
B. 1 terabyte
C. 2 gigabytes
D. 1 gigabyte
Answer: B

SCO최신덤프   090-077   090-077덤프

지난 몇년동안 IT산업의 지속적인 발전과 성장을 통해SCO 인증090-077시험은 IT인증시험중의 이정표로 되어 많은 인기를 누리고 있습니다. IT인증시험을ITExamDump덤프로 준비해야만 하는 이유는ITExamDump덤프는 IT업계전문가들이 실제시험문제를 연구하여 시험문제에 대비하여 예상문제를 제작했다는 점에 있습니다.