Motorola Solutions인증 MSC-131시험을 패스하는 지름길은ITExamDump에서 연구제작한 Motorola Solutions 인증MSC-131시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 Motorola Solutions 인증MSC-131시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. Motorola Solutions 인증MSC-131시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고ITExamDump의Motorola Solutions 인증MSC-131시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.
Motorola Solutions인증 MSC-131시험을 등록했는데 마땅한 공부자료가 없어 고민중이시라면ITExamDump의Motorola Solutions인증 MSC-131덤프를 추천해드립니다. ITExamDump의Motorola Solutions인증 MSC-131덤프는 거의 모든 시험문제를 커버하고 있어 시험패스율이 100%입니다. ITExamDump제품을 선택하시면 어려운 시험공부도 한결 가벼워집니다.
Motorola Solutions MSC-131인증시험을 패스하고 자격증 취득으로 하여 여러분의 인생은 많은 인생역전이 이루어질 것입니다. 회사, 생활에서는 물론 많은 업그레이드가 있을 것입니다. 하지만MSC-131시험은Motorola Solutions인증의 아주 중요한 시험으로서MSC-131시험패스는 쉬운 것도 아닙니다.
여러분은 아직도Motorola Solutions MSC-131인증시험의 난이도에 대하여 고민 중입니까? 아직도Motorola Solutions MSC-131시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 있습니까? 빨리빨리ITExamDump를 선택하여 주세요. 그럼 빠른 시일내에 많은 공을 들이지 않고 여러분으 꿈을 이룰수 있습니다.
시험 번호/코드: MSC-131
시험 이름: Motorola Solutions (Design and Deploy AirDefense Solutions)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 103 문항
업데이트: 2014-02-25
MSC-131 덤프무료샘플다운로드하기: http://www.itexamdump.com/MSC-131.html
NO.1 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D
Motorola Solutions자격증 MSC-131 MSC-131 MSC-131자격증
NO.2 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A
Motorola Solutions덤프 MSC-131 MSC-131
NO.3 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B
Motorola Solutions자격증 MSC-131최신덤프 MSC-131 MSC-131
NO.4 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C
Motorola Solutions인증 MSC-131자격증 MSC-131 MSC-131 MSC-131 dumps
NO.5 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C
Motorola Solutions인증 MSC-131 MSC-131 MSC-131 MSC-131
NO.6 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C
Motorola Solutions자격증 MSC-131기출문제 MSC-131덤프 MSC-131 MSC-131 pdf
NO.7 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D
Motorola Solutions MSC-131 MSC-131 pdf
NO.8 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A
Motorola Solutions MSC-131덤프 MSC-131 MSC-131 MSC-131 pdf
NO.9 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D
Motorola Solutions MSC-131 MSC-131인증
NO.10 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D
Motorola Solutions MSC-131덤프 MSC-131 MSC-131
NO.11 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C
Motorola Solutions MSC-131 dumps MSC-131덤프 MSC-131덤프
NO.12 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D
Motorola Solutions인증 MSC-131 MSC-131 MSC-131 MSC-131자료
NO.13 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A
Motorola Solutions MSC-131 MSC-131 MSC-131
NO.14 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C
Motorola Solutions pdf MSC-131덤프 MSC-131자격증 MSC-131시험문제
NO.15 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C
Motorola Solutions MSC-131 MSC-131자료 MSC-131 pdf
ITexamdump의 700-505덤프의 VCE테스트프로그램과 1Z0-033덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-456시험에 대비한 고품질 덤프와 000-N55시험 최신버전덤프를 제공해드립니다. 최고품질 000-318시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기