Esri EADP10 덤프자료

Esri인증EADP10시험은 IT인증시험과목중 가장 인기있는 시험입니다. ITExamDump에서는Esri인증EADP10시험에 대비한 공부가이드를 발췌하여 IT인사들의 시험공부 고민을 덜어드립니다. ITExamDump에서 발췌한 Esri인증EADP10덤프는 실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험준비 공부의 완벽한 선택입니다.

성공으로 향하는 길에는 많은 방법과 방식이 있습니다. Esri인증 EADP10시험을 패스하는 길에는ITExamDump의Esri인증 EADP10덤프가 있습니다. ITExamDump의Esri인증 EADP10덤프는 실제시험 출제방향에 초점을 두어 연구제작한 시험준비공부자료로서 높은 시험적중율과 시험패스율을 자랑합니다.국제적으로 승인해주는 IT자격증을 취득하시면 취직 혹은 승진이 쉬워집니다.

ITExamDump의 Esri인증 EADP10시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 Esri인증 EADP10덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. Esri인증 EADP10시험을 통과하여 자격증을 취득하려면ITExamDump의 Esri인증 EADP10덤프로 시험준비공부를 하세요.

우리 ITExamDump에서는 여러분을 위하여 정확하고 우수한 서비스를 제공하였습니다. 여러분의 고민도 덜어드릴 수 있습니다. 빨리 성공하고 빨리Esri EADP10인증시험을 패스하고 싶으시다면 우리 ITExamDump를 장바구니에 넣으시죠 . ITExamDump는 여러분의 아주 좋은 합습가이드가 될것입니다. ITExamDump로 여러분은 같고 싶은 인증서를 빠른시일내에 얻게될것입니다.

자기한테 딱 맞는 시험준비공부자료 마련은 아주 중요한 것입니다. ITExamDump는 업계에 많이 알려져있는 덤프제공 사이트입니다. ITExamDump덤프자료가 여러분의 시험준비자료로 부족한 부분이 있는지는 구매사이트에서 무료샘플을 다운로드하여 덤프의일부분 문제를 우선 체험해보시면 됩니다. ITExamDump에서 제공해드리는 퍼펙트한 덤프는 여러분이 한방에 시험에서 통과하도록 최선을 다해 도와드립니다.

만약Esri인증EADP10시험을 통과하고 싶다면, Pass4Tes의 선택을 추천합니다. Pass4Tes선택은 가장 적은 투자로 많은 이익을 가져올 수 있죠, Pass4Tes에서 제공하는Esri인증EADP10시험덤프로 시험패스는 문제없스니다. ITExamDump는 전문적으로 it인증시험관련문제와 답을 만들어내는 제작팀이 있으며, Pass4Tes 이미지 또한 업계에서도 이름이 있답니다

시험 번호/코드: EADP10

시험 이름: Esri (ArcGIS Desktop Professional)

EADP10 덤프무료샘플다운로드하기: http://www.itexamdump.com/EADP10.html

NO.1 Using street data for a large metropolitan area, which analysis method shows the nearest hospital to a
traffic accident?
A. closest facility
B. route
C. find nearest
D. least-cost path
Answer: A

Esri   EADP10 dumps   EADP10   EADP10기출문제

NO.2 A user wants to connect new laterals to supply water to newly built houses. What edge type supports
this function.?
A. an edge between two junctions
B. a complex edge
C. a subtype of edge
D. a simple edge
Answer: D

Esri dump   EADP10   EADP10덤프   EADP10

NO.3 Refer to the exhibits.
An ArcGIS user is attempting to create a relationship class between the two tables shown in the exhibit
using POSTAL_CODE and Zip_Code as the origin primary key and destination foreign keys, respectively.
However when the user tries to set the keys Zip_Code does not appear in the drop-down list of candidate
keys
What should the user do to successfully create the relationship class?
A. change the relationship type from non attributed to attributed
B. make sure both tables are in the same geodatabase
C. create data type compatible key fields
D. move both tables to the same feature dataset
Answer: B

Esri   EADP10   EADP10 dump

NO.4 Using the Spatial Analyst IDW (Inverse Distance Weighted) tool an ArcGIS user interpolates a point
feature class to a raster. The user notices that some high point values near the edge of the feature class
seem to have a dramatic effect on the output. This occurs even in areas that are far from the high edge
values
Which two parameters should the user consider changing in the IDW tool? (Choose two)
A. z-value field
B. search radius
C. power
D. output cell size
E. weight
Answer: D,E

Esri dump   EADP10   EADP10   EADP10시험문제   EADP10   EADP10

NO.5 An ArcGIS user is working with a composite address locator that consists of the following:
-Citywide Address Locator -Regional Address Locator -Nationwide Address Locator
How does a composite address locator work if no selection criteria are specified? (Choose two)
A. searches all locators in sequence
B. searches the largest address locator first
C. searches the smallest address locator first
D. searches until an address is found
E. searches the locator with the closest zone
Answer: B,D

Esri   EADP10   EADP10

NO.6 An ArcGIS user receives two shapefiles that are defined with the same projection and represent
features in the same study area. When they are displayed together in ArcMap, the difference of their
locations in coordinate space is so large that they are barely visible when viewed at their full extent.
How can the user determine whether the projections of the shapefiles are correctly defined?
A. by comparing the shapefiles to a correctly projected dataset that has a large enough extent to
encompass the study area
B. by systematically changing the spatial reference of the data frame until the shapefiles correctly align
C. by using the Spatial Adjustment toolbar to move the shapefiles to the same part of coordinate space
D. by examining the metadata of both shapefiles to determine the projection processes applied to the
data1
Answer: A

Esri pdf   EADP10   EADP10   EADP10   EADP10 dump

NO.7 Refer to the exhibit.
Based on the exhibit shown, what has the author of this map done to improve drawing performance?
A. created annotation
B. applied simple symbology
C. generalized features
D. set scale-dependent rendering
Answer: D

Esri pdf   EADP10 dump   EADP10자격증   EADP10자료

NO.8 An ArcGIS user runs the Central Feature geoprocessing tool on a polygon feature class. The output
feature is far north of the center of the feature class
Why is the output feature off center of the feature class?
A. There are more polygons in the northern part of the feature class
B. The polygons in the northern part of the feature class are larger
C. The feature class is not in the same promotion as the data frame
D. A weight field is not specified
Answer: D

Esri시험문제   EADP10   EADP10자격증   EADP10

NO.9 A taster contains pixels with decimal values.
Which method is used to round raster pixel values to the nearest whole number?
A. use the Round Up tool (Spatial Analyst), then the Round Down tool (Spatial Analyst)
B. use the Round Down tool (Spatial Analyst), then the Round Up tool (Spatial Analyst)
C. use the Plus tool (Spatial Analyst) to add 1, then the Minus tool (Spatial Analyst) to subtract 0.5
D. use the Plus tool (Spatial Analyst) to add 0.5, then the int tool (Spatial Analyst) to truncate to the
nearest integer
Answer: B

Esri덤프   EADP10최신덤프   EADP10   EADP10   EADP10

NO.10 An ArcGIS user created a geoprocessing script in which the output layer ¯ s sy m bo l ogy p r ope rt y i s se t t o
an existing layer file. The user intends to share the tool with another ArcGIS user.
How can the user share the script tool while maintaining the symbology in the output layer?
A. Share the script tool while the sumbology layer file embedded in it
B. Publish the script tool as a geoprocessing service to ArcGIS Server
C. Distribute the Toolshare folder containing the script tool and related data
D. Upload the script tool as a model to an FTP site
Answer: B

Esri   EADP10 dumps   EADP10기출문제

NO.11 An ArcGlS user plans to distribute a series of map documents where the amount of time the map file
can be viewed is limited.
Which format should the user create to specify a timeout period for these maps?
A. .mpk
B. .ipk
C. .pmf
D. .msd
Answer: D

Esri기출문제   EADP10자격증   EADP10시험문제   EADP10자료   EADP10   EADP10자격증

NO.12 An image that is displayed as draped over a digital elevation model (DEM) in ArcGlobe appears to be
overly pixilated.
Which property should be changed to make the image appear smoother?
A. stretch type
B. resampling method
C. contrast setting
D. unit conversion
Answer: C

Esri기출문제   EADP10   EADP10인증

NO.13 In the value for the latitude of origin in a projection tile is modified, making the value less negative
(e.g. from -45 to -28). which way does the data move?'
A. north
B. south
C. east
D. west
Answer: B

Esri   EADP10 dump   EADP10최신덤프   EADP10   EADP10덤프

NO.14 A water utility company had received calls from several customers complaining of low water pressure.
Using a geometric network representing the water network, how can an ArcGIS user determine the most
likely location of the problem?
A. place junction flags on each customer water meter and use the Find Common Ancestors trace task
B. place junction flags on each customer water meter and use the Find Disconnected trace task
C. place a junction barrier on each customer water meter and use the Trace Upstream trace task
D. place a junction barrier on each customer water meter and use the Find Path upstream trace task
Answer: A

Esri덤프   EADP10 pdf   EADP10

NO.15 When rematching geocoding results, a user notices that E St is being interpreted as East St. How
should a user resolve this issue for future geocoding?
A. remove the entry defining E to mean east in the geocoding XML files
B. recreate the address locator with new reference data
C. create a composite address locator where E is not recognized as east
D. change E to east in the input table to be geocoded before geocoding
Answer: C

Esri자료   EADP10   EADP10시험문제

ITExamDump 안에는 아주 거대한IT업계엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련업계예서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%로의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.