70-411 덤프 Microsoft 인증

우리 ITExamDump에서는 최고이자 최신의Microsoft 인증70-411덤프자료를 제공 함으로 여러분을 도와Microsoft 인증70-411인증자격증을 쉽게 취득할 수 있게 해드립니다.만약 아직도Microsoft 인증70-411시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴수 있습니다.

Microsoft인증 70-411시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. Microsoft인증 70-411시험을 패스하려면 ITExamDump의Microsoft인증 70-411덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. Microsoft인증 70-411덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.

ITExamDump전문가들은Microsoft 70-411인증시험만을 위한 특별학습가이드를 만들었습니다.Microsoft 70-411인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게Microsoft 70-411인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다

시험 번호/코드: 70-411

시험 이름: Microsoft (Administering Windows Server 2012)

네트웨크시대인 지금 인터넷에 검색하면 수많은Microsoft인증 70-411시험공부자료가 검색되는데 그중에서도ITExamDump에서 출시한 Microsoft인증 70-411덤프가 가장 높은 인지도를 지니고 있습니다. Microsoft인증 70-411덤프에는Microsoft인증 70-411시험문제의 기출문제와 예상문제가 수록되어있어 덤프에 있는 문제만 잘 공부하시면 시험은 가볍게 패스가능합니다. Microsoft인증 70-411시험을 통과하여 자겨증취득하는 꿈에 더욱 가까이 다가가세요.

ITExamDump의 Microsoft 인증 70-411시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 Microsoft 인증 70-411실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 Microsoft 인증 70-411실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 Microsoft 인증 70-411덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.

많은 사이트에서Microsoft 인증70-411 인증시험대비자료를 제공하고 있습니다. 그중에서 ITExamDump를 선택한 분들은Microsoft 인증70-411시험통과의 지름길에 오른것과 같습니다. ITExamDump는 시험에서 불합격성적표를 받으시면 덤프비용을 환불하는 서

IT업계에 종사하고 계시나요? 최근 유행하는Microsoft인증 70-411 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 Microsoft인증 70-411덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 Microsoft인증 70-411덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?

70-411 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-411.html

NO.1 Your network contains an Active Directory domain named contoso.com. The domain contains
five servers. The servers are configured as shown in the following table.
All desktop computers in contoso.com run Windows 8 and are configured to use BitLocker Drive
Encryption (BitLocker) on all local disk drives. You need to deploy the Network Unlock feature. The
solution must minimize the number of features and server roles installed on the network. To which
server should you deploy the feature?
A. Server3
B. Server5
C. Server1
D. Server2
E. Server4
Answer: B

Microsoft   70-411덤프   70-411   70-411덤프   70-411기출문제

NO.2 You have a server named Admin1 that runs Windows Server 2012. Admin1 has the File Server
Resource Manager role service installed. Admin1 has a folder named Folder1 that is used by the
human resources department. You need to ensure that an email notification is sent immediately to
the human resources manager when a user copies an audio file or a video file to Folder1. What
should you configure on Admin1?
A. A file screen
B. A file screen exception
C. A file group
D. A storage report task
Answer: A

Microsoft최신덤프   70-411자격증   70-411 dumps   70-411덤프   70-411 dump

NO.3 Your network contains an Active Directory domain named contoso.com. The domain contains
two servers named Admin1 and Server2. Both servers run Windows Server 2012. Both servers have
the File and Storage Services server role, the DFS Namespaces role service, and the DFS Replication
role service installed. Admin1 and Server2 are part of a Distributed File System (DFS) Replication
group named Group1. Admin1 and Server2 are separated by a low-speed WAN connection. You
need to limit the amount of bandwidth that DFS can use to replicate between Admin1 and Server2.
What should you modify?
A. The cache duration of the namespace
B. The staging quota of the replicated folder
C. The referral ordering of the namespace
D. The schedule of the replication group
Answer: D

Microsoft   70-411   70-411   70-411인증   70-411

NO.4 Your network contains an Active Directory domain named contoso.com. All servers run
Windows Server 2012. All sales users have laptop computers that run Windows 8. The sales
computers are joined to the domain. All user accounts for the sales department are in an
organizational unit (OU) named Sales_OU. A Group Policy object (GPO) named GPO1 is linked to
Sales_OU. You need to configure a dial-up connection for all of the sales users. What should you
configure from User Configuration in GPO1?
A. Policies/Admin1strative Templates/Network/Windows Connect Now
B. Policies/Admin1strative Templates/Windows Components/Windows Mobility Center
C. Preferences/Control Panel Settings/Network Options
D. Policies/Admin1strative Templates/Network/Network Connections
Answer: C

Microsoft자료   70-411자료   70-411자격증   70-411시험문제   70-411 pdf
Explanation/Reference:
http://technet.microsoft.com/en-us/library/cc772107.aspx
To create a new Dial-Up Connection preference item
Open the Group Policy Management Console. Right-click the Group Policy object (GPO) that should
contain the new preference item, and then click Edit.
In the console tree under Computer Configuration or User Configuration, expand the Preferences
folder, and then expand the Control Panel Settings folder.
Right-click the Network Options node, point to New, and select Dial-Up Connection.

NO.5 Your network contains an Active Directory domain named contoso.com. The domain contains
a domain controller named DC1 that runs Windows Server 2012. You have a Group Policy object
(GPO) named GPO1 that contains several custom Administrative templates. You need to filter the
GPO to display only settings that will be removed from the registry when the GPO falls out of scope.
The solution must only display settings that are either enabled or disabled and that have a comment.
How should you configure the filter? To answer, select the appropriate options below. Select three.
A. Set Managed to: Yes
B. Set Managed to: No
C. Set Managed to: Any
D. Set Configured to: Yes
E. Set Configured to: No
F. Set Configured to: Any
G. Set Commented to: Yes
H. Set Commented to: No
I. Set Commented to: Any
Answer: AFG

Microsoft   70-411   70-411   70-411자격증
Explanation/Reference:
A: Set Managed to: Yes There are two kinds of Administrative Template policy settings: Managed
and Unmanaged. The Group Policy Client service governs Managed policy settings and removes a
policy setting when it is no longer within scope of the user or computer.
F: Set Configured tO: Any We want to display both settings that are enable and disabled.
G: Set Commented to: Yes Only settings that are commented should be displayed. Note: Filter with
Property Filters The Local Group Policy Editor allows you to change the criteria for displaying
Administrative Template policy settings. By default, the editor displays all policy settings, including
unmanaged policy settings. However, you can use property filters to change how the Local Group
Policy Editor displays Administrative Template policy settings. There are three inclusive property
filters that you can use to filter Administrative Templates. These property filters include:
*Managed
*Configured
*Commented

NO.6 HOTSPOT
Your network contains an Active Directory domain named contoso.com. You have several Windows
PowerShell scripts that execute when users log on to their client computer. You need to ensure that
all of the scripts execute completely before the users can access their desktop. Which setting should
you configure? To answer, select the appropriate setting in the answer area.
Answer:

NO.7 Your network contains an Active Directory domain named contoso.com. The functional level of
the forest is Windows Server 2008 R2. Computer accounts for the marketing department are in an
organizational unit (OU) named Departments\Marketing\Computers. User accounts for the
marketing department are in an OU named Departments\Marketing\Users. All of the marketing
user accounts are members of a global security group named MarketingUsers. All of the marketing
computer accounts are members of a global security group named MarketingComputers. In the
domain, you have Group Policy objects (GPOs) as shown in the exhibit. (Click the Exhibit button.)
You create two Password Settings objects named PSO1 and PSO2. PSO1 is applied to MarketingUsers.
PSO2 is applied to MarketingComputers. The minimum password length is defined for each policy as
shown in the following table.
You need to identify the minimum password length required for each marketing user. What should
you identify?
A. 5
B. 6
C. 7
D. 10
E. 12
Answer: D

Microsoft덤프   70-411   70-411자격증   70-411시험문제   70-411 pdf

NO.8 Your network contains an Active Directory domain named contoso.com. The domain contains
a file server named Admin1 that runs Windows Server 2012. You view the effective policy settings
of Admin1 as shown in the exhibit. (Click the Exhibit button.)
On Admin1, you have a folder named C:\Share1 that is shared as Share1. Share1 contains
confidential data. A group named Group1 has full control of the content in Share1. You need to
ensure that an entry is added to the event log whenever a member of Group1 deletes a file in
Share1. What should you configure?
A. The Audit File System setting of Servers GPO
B. The Sharing settings of C:\Share1
C. The Security settings of C:\Share1
D. The Audit File Share setting of Servers GPO
Answer: C

Microsoft덤프   70-411 dumps   70-411   70-411 dumps

NO.9 HOTSPOT
Your network contains an Active Directory domain named contoso.com. All servers run Windows
Server 2012. The domain contains an organizational unit (OU) named FileServers_OU.
FileServers_OU contains the computer accounts for all of the file servers in the domain. You need to
audit the users who successfully access shares on the file servers. Which audit category should you
configure? To answer, select the appropriate category in the answer area.
Answer:

NO.10 Your network contains an Active Directory domain named contoso.com. The domain contains
a server named Admin1 that runs Windows Server 2012. Admin1 has the File Server Resource
Manager role service installed. You configure a quota threshold as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that a user named User1 receives an email notification when the threshold is
exceeded. What should you do?
A. Configure the File Server Resource Manager Options.
B. Modify the members of the Performance Log Users group.
C. Create a performance counter alert.
D. Create a classification rule.
Answer: A

Microsoft   70-411   70-411인증   70-411   70-411

ITExamDump는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다. 이는ITExamDump 의 IT전문가가 오랜 시간동안 IT인증시험을 연구한 끝에 시험대비자료로 딱 좋은 덤프를 제작한 결과입니다. Microsoft인증 70-411덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이Microsoft인증 70-411덤프 적중율과 패스율은 100% 보장해드립니다. Microsoft인증 70-411시험에 도전하려는 분들은ITExamDump 의Microsoft인증 70-411덤프로 시험을 준비할것이죠?