2014년 3월 3일 월요일

JN0-331 덤프 Juniper 자격증

빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로Juniper JN0-331인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.

ITExamDump 에서 제공해드리는 Juniper인증JN0-331시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. Juniper인증JN0-331시험은ITExamDump 표Juniper인증JN0-331덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.

ITExamDump전문가들은Juniper JN0-331인증시험만을 위한 특별학습가이드를 만들었습니다.Juniper JN0-331인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게Juniper JN0-331인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다

시험 번호/코드: JN0-331
시험 이름: Juniper (SEC,Specialist(JNCIS-SEC))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 131 문항
업데이트: 2014-03-02

ITExamDump는Juniper JN0-331시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의Juniper JN0-331시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Juniper JN0-331시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

JN0-331 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-331.html

NO.1 Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday
and Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C

Juniper pdf   JN0-331인증   JN0-331   JN0-331자격증

NO.2 What is the default session timeout for UDP sessions?
A. 30 seconds
B. 1 minute
C. 5 minutes
D. 30 minutes
Answer: C

Juniper   JN0-331   JN0-331 dumps   JN0-331

NO.3 Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D

Juniper pdf   JN0-331자료   JN0-331   JN0-331

NO.4 By default, which condition would cause a session to be removed from the session table?
A. Route entry for the session changed.
B. Security policy for the session changed.
C. The ARP table entry for the source IP address timed out.
D. No traffic matched the session during the timeout period.
Answer: D

Juniper   JN0-331   JN0-331   JN0-331   JN0-331

NO.5 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards
traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router
performs route lookup only for the first packet.
Answer: BC

Juniper   JN0-331 pdf   JN0-331 pdf

NO.6 For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer: A

Juniper   JN0-331 dump   JN0-331 dump   JN0-331기출문제   JN0-331

NO.7 What is the purpose of a zone in JUNOS Software?
A. A zone defines a group of security devices with a common management.
B. A zone defines the geographic region in which the security device is deployed.
C. A zone defines a group of network segments with similar security requirements.
D. A zone defines a group of network segments with similar class-of-service requirements.
Answer: C

Juniper   JN0-331인증   JN0-331   JN0-331   JN0-331

NO.8 Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D

Juniper   JN0-331   JN0-331 dump   JN0-331자료   JN0-331기출문제

NO.9 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B

Juniper   JN0-331   JN0-331

NO.10 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure
traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not
separate broadcast domains.
Answer: BC

Juniper dump   JN0-331시험문제   JN0-331자료   JN0-331최신덤프

NO.11 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections.
How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D

Juniper dump   JN0-331   JN0-331 pdf

NO.12 Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at
the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of
the devices.
Answer: D

Juniper   JN0-331 dump   JN0-331   JN0-331자격증   JN0-331

NO.13 Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is
enabled.
Answer: BD

Juniper   JN0-331   JN0-331 dumps   JN0-331인증   JN0-331

NO.14 Which two statements about JUNOS Software packet handling are correct? (Choose two.)
A. JUNOS Software applies service ALGs only for the first packet of a flow.
B. JUNOS Software uses fast-path processing only for the first packet of a flow.
C. JUNOS Software performs route and policy lookup only for the first packet of a flow.
D. JUNOS Software applies SCREEN options for both first and consecutive packets of a flow.
Answer: CD

Juniper시험문제   JN0-331   JN0-331   JN0-331   JN0-331

NO.15 Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer: ADE

Juniper pdf   JN0-331시험문제   JN0-331 dump   JN0-331

NO.16 In JUNOS Software, which three packet elements can be inspected to determine if a session already
exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer: ACE

Juniper   JN0-331   JN0-331   JN0-331자료   JN0-331 dump   JN0-331자격증

NO.17 Which two functions of JUNOS Software are handled by the data plane? (Choose two.)
A. NAT
B. OSPF
C. SNMP
D. SCREEN options
Answer: AD

Juniper   JN0-331   JN0-331

NO.18 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the device itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

Juniper pdf   JN0-331   JN0-331시험문제   JN0-331   JN0-331자료

NO.19 What are two components of the JUNOS Software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC

Juniper자료   JN0-331   JN0-331 dump   JN0-331   JN0-331 pdf   JN0-331 dumps

NO.20 Which two configurations are valid? (Choose two.)
A. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
security-zone blue {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}
}
B. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
}
security-zone blue {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
C. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}
D. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}
Answer: AD

Juniper   JN0-331   JN0-331 pdf   JN0-331   JN0-331인증   JN0-331

ITexamdump의 350-029덤프의 VCE테스트프로그램과 HH0-240덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCAD510시험에 대비한 고품질 덤프와 1Y0-300시험 최신버전덤프를 제공해드립니다. 최고품질 648-238시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-331.html

댓글 없음:

댓글 쓰기