ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은IBM A2090-544인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는IBM A2090-544관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는IBM A2090-544자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는IBM A2090-544인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.
IT인증자격증은 국제적으로 승인받는 자격증이기에 많이 취득해두시면 취업이나 승진이나 이직이나 모두 편해집니다. 다른 사람이 없는 자격증을 내가 가지고 있다는것은 실력을 증명해주는 수단입니다. IBM인증 A2090-544시험은 널리 승인받는 자격증의 시험과목입니다. IBM인증 A2090-544덤프로IBM인증 A2090-544시험공부를 하시면 시험패스 난이도가 낮아지고 자격증 취득율이 높이 올라갑니다.자격증을 많이 취득하여 취업이나 승진의 문을 두드려 보시면 빈틈없이 닫힌 문도 활짝 열릴것입니다.
시험 번호/코드: A2090-544
시험 이름: IBM (Assessment: DB2 9.7 Advanced DBA for LUW)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 110 문항
업데이트: 2014-03-09
IBM인증 A2090-544시험은 IT인증자격증중 가장 인기있는 자격증을 취득하는 필수시험 과목입니다. IBM인증 A2090-544시험을 패스해야만 자격증 취득이 가능합니다. ITExamDump의IBM인증 A2090-544는 최신 시험문제 커버율이 높아 시험패스가 아주 간단합니다. IBM인증 A2090-544덤프만 공부하시면 아무런 우려없이 시험 보셔도 됩니다. 시험합격하면 좋은 소식 전해주세요.
IBM A2090-544인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.IBM A2090-544시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.
취직을 원하시나요? 승진을 원하시나요? 연봉인상을 원하시나요? 무엇을 원하시든 국제적으로 인정받은 IT인증자격증을 취득하는것이 길입니다. IBM인증 A2090-544시험은 널리 인정받는 인기자격증의 시험과목입니다. IBM인증 A2090-544시험을 패스하여 자격증을 취득하면 소원이 이루어집니다. ITExamDump의IBM인증 A2090-544덤프는 시험패스율이 높아IBM인증 A2090-544시험준비에 딱 좋은 공부자료입니다. ITExamDump에서 덤프를 마련하여 자격증취득에 도전하여 인생을 바꿔보세요.
A2090-544 덤프무료샘플다운로드하기: http://www.itexamdump.com/A2090-544.html
NO.1 What is a method for enabling non-buffered I/O at the table space level in a DB2
database?
A. Set the DB2_DIRECT_IO configuration parameter to YES.
B. Set the DB2_FILESYSTEM_CACHE configuration parameter to YES.
C. Use the USE DIRECT IO clause with the CREATE TABLESPACE or ALTER
TABLESPACE command.
D. Use the NO FILE SYSTEM CACHING clause with the CREATE TABLESPACE or ALTER
TABLESPACE command.
Answer: D
IBM시험문제 A2090-544최신덤프 A2090-544 A2090-544 A2090-544
NO.2 Given the following statements:
CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE :\myfile1?1000,
FILE
:\myfile2?800);
ALTER TABLESPACE mytbsp EXTEND (FILE :\myfile1?200, FILE :\myfile2?400);
How large are the containers MYFILE1 and MYFILE2?
A. MYFILE1 = 200 pages, MYFILE2 = 400 pages
B. MYFILE1 = 1200 pages, MYFILE2 = 1000 pages
C. MYFILE1 = 1400 pages, MYFILE2 = 1200 pages
D. MYFILE1 = 1200 pages, MYFILE2 = 1200 pages
Answer: D
IBM A2090-544자료 A2090-544 A2090-544덤프
NO.3 Assuming the following commands are executed in the order shown:
CREATE DATABASE mydb AUTOMATIC STORAGE NO;
CONNECT TO mydb;
CREATE TABLESPACE tbsp1
MANAGED BY DATABASE USING (FILE 'C:\file1' 1 M, FILE 'C:\file2' 1 M)
AUTORESIZE YES
INCREASESIZE 2 M
MAXSIZE 100 M;
CREATE TABLE tab_a (c1 INT, c2 CHAR(30), c3 XML) COMPRESS YES;
IMPORT FROM data.del OF DEL INSERT INTO tab_a;
If the following command is executed:
ALTER DATABASE mydb ADD STORAGE ON ?mnt/file_1? ?mnt/file_2?
Which statement is true?
A. The ALTER DATABASE command will fail because database MYDB was not created as
an automatic
storage database.
B. The ALTER DATABASE command will convert database MYDB to an automatic storage
database, and
table space TBSP1 will automatically be converted to an automatic storage table space.
C. Table space TBSP1 can be converted to an automatic storage table space at any time by
executing the
ALTER TABLESPACE statement.
D. Table space TBSP1 will be placed in Conversion Pending?state and must be converted to
an
automatic storage table space before it can be used.
Answer: C
IBM A2090-544최신덤프 A2090-544 dump A2090-544자료
NO.4 Which command produced the result shown below?
Tracking Memory on: 2010/02/18 at 21:18:19
Memory for database: SAMPLE
bph (2) utilh pckcacheh catcacheh bph (1) bph (S32K) bph (S16K)
4.2M 64.0K 256.0K 64.0K 288.0M 704.0K 448.0K
bph (S8K) bph (S4K) shsorth lockh dbh other
320.0K 256.0K 64.0K 10.0M 4.7M 128.0K
A. db2mtrk -i
B. db2mtrk -d
C. db2mtrk -p
D. db2mtrk -a
Answer: B
IBM A2090-544최신덤프 A2090-544 A2090-544
NO.5 You have a database with eight partitions on a single server. Immediately after
executing the following
command:
CREATE BUFFERPOOL mybp DEFERRED SIZE 3000
How much memory is consumed by buffer pool MYBP on the server?
A. 0 pages
B. 3000 pages
C. 24000 pages
D. 192000 pages
Answer: A
IBM자격증 A2090-544자격증 A2090-544 dumps
NO.6 A table named TAB_A was created with the COMPRESS YES option specified and
populated with
100,000 rows. If a DBA wants to create an index on table TAB_A, which statement is true?
A. In order for the index to be compressed, it must be enabled for compression by specifying
the
COMPRESS YES option with the CREATE INDEX statement that is used to create it.
B. The index will automatically be compressed since the table it is associated with is
compressed; the
ALTER INDEX command does not have to be executed.
C. In order for the index to be compressed, it must be enabled for compression by specifying
the
COMPRESS YES option in the CREATE INDEX statement used to create it; however, the
index will not
be compressed until the ALTER INDEX command is used to create an index compression
dictionary.
D. The index will automatically be enabled for compression because the associated table is
compressed;
however, the index will not be compressed until it is REORGed.
Answer: B
IBM A2090-544 A2090-544 A2090-544덤프
NO.7 Considering you have an OLTP workload consisting of similar queries that are
repeatedly generated
and differ only in their predicate values, what can be done to reduce compilation overhead?
A. UPDATE DB CFG USING STMT_CONC LITERALS
B. UPDATE DB CFG USING SQL_CONC LITERALS
C. UPDATE DB CFG USING SQL_CONC YES
D. UPDATE DB CFG USING STMT_CONC OFF
Answer: A
IBM A2090-544 dumps A2090-544
NO.8 if table space TBSP1 is using automatic storage, and the existing storage paths are
full, which
command would increase the available storage?
A. ALTER DATABASE ADD STORAGE ON '/db2/filesystem1'
B. ALTER TABLESPACE tbsp1 ADD ('/db2/filesystem1')
C. ALTER DATABASE ADD STORAGE FOR tbsp1 ('/db2/filesystem1')
D. ALTER TABLESPACE tbsp1 EXTEND USING ('/db2/filesystem1')
Answer: A
IBM A2090-544자격증 A2090-544자격증
NO.9 Which action can be performed by the ALTER TABLESPACE statement?
A. Change an SMS table space to a DMS table space on any database partition.
B. Change the size of a container in an SMS table space.
C. Change the EXTENTSIZE setting for a table space on a database partition that currently
has no
containers.
D. Add a container to an SMS table space on a database partition that currently has no
containers.
Answer: D
IBM인증 A2090-544 pdf A2090-544시험문제 A2090-544자료
NO.10 A database and a table space were created using the following commands:
CREATE DATABASE mydb AUTOMATIC STORAGE NO;
CONNECT TO mydb;
CREATE TABLESPACE tbsp1
MANAGED BY DATABASE USING (FILE '/mnt/file1' 1 M, FILE '/mnt/file2' 1 M)
AUTORESIZE YES
INCREASESIZE 2 M
MAXSIZE 100 M;
Afterwards, two tables were created in table space TBSP1 and both tables were populated
with 100,000
rows. If a DBA decides that database MYDB should use automatic storage, which
command(s) are
needed to convert the database?
A. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
B. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
C. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
D. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
Answer: A
IBM A2090-544자료 A2090-544인증 A2090-544시험문제 A2090-544
NO.11 Database DB1 is defined on partitions 1 through 4, with the system catalog defined on
partition 2. This
database is configured with LOGRETAIN=YES and TRACKMOD=YES. On Sunday evening,
a full online
database backup completes successfully on all partitions. On Monday afternoon, a new table
space is
created in a database partition group defined on partitions 3 and 4. On Monday evening a
backup is
executed as follows :
BACKUP DATABASE db1 ONLINE INCREMENTAL
What are the results of this operation?
A. The backup completes successfully on the catalog partion only.
B. The backup completes successfully on database partitions 1 and 2, but fails on database
partitions 3
and 4.
C. The backup completes successfully on database partitions 3 and 4, but fails on database
partitions 1
and 2.
D. The backup completes successfully on all database partitions.
Answer: B
IBM A2090-544 A2090-544 A2090-544 pdf
NO.12 How can you change an existing non-partitioned index for a partitioned table to a
partitioned index?
A. Use the ALTER INDEX command.
B. Use the DROP INDEX and CREATE INDEX commands.
C. Use the REORG INDEX command.
D. Use the ALTER INDEX and REORG INDEX commands.
Answer: B
IBM pdf A2090-544 A2090-544 A2090-544
NO.13 A DBA wants to create table space named MYTBLSP in a database with five
partitions.
Which command will create the table space on all five partitions?
A. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE
'/tbsp/cont1P$NODES'
5000)
B. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE
'/tbsp/cont1P0' to
'/tbsp/cont1P4' 5000)
C. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE
'/tbsp/cont1P[0-4]' 5000)
D. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE '/tbsp/cont1P
$N' 5000)
Answer: D
IBM A2090-544 A2090-544덤프 A2090-544
NO.14 A database and a table space were created using the following commands:
CREATE DATABASE mydb AUTOMATIC STORAGE NO;
CONNECT TO mydb;
CREATE TABLESPACE tbsp1
MANAGED BY DATABASE USING (FILE '/mnt/file1' 1 M, FILE '/mnt/file2' 1 M)
AUTORESIZE YES
INCREASESIZE 2 M
MAXSIZE 100 M;
$>?
Afterwards, two tables were created in table space TBSP1 and both tables were populated
with 100,000
rows. If a DBA decides that database MYDB should use automatic storage, which
command(s) are
needed to convert both the database and table space TBSP1?
A. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
B. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
C. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
D. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
Answer: B
IBM자격증 A2090-544 A2090-544 A2090-544 dumps
NO.15 A table space has been created in the default database partition group.
What must you do to change the partition group for that table space?
A. Export the table space and reload it into the new partition group.
B. Move the table space to the new partition group as parameters.
C. Drop the table space and re-create it in the new partition group.
D. Alter the table space, specifying the new partition group.
Answer: C
IBM pdf A2090-544인증 A2090-544자료 A2090-544기출문제
NO.16 A DBA needs to create a federated database and configure access to join data from
three Oracle
instances and one DB2 database.
Which objects are needed to establish the specified connections?
A. 1 Oracle server , 1 DB2 server , 3 Oracle wrappers , and nicknames for each database
B. 1 Oracle server , 1 DB2 server , 1 Oracle wrapper , 1 DB2 wrapper , and nicknames for
each database
C. 3 Oracle servers , 1 DB2 server , 3 Oracle wrappers , 1 DB2 wrapper , and nicknames for
each
database
D. 3 Oracle servers , 1 DB2 server , 1 Oracle wrapper , 1 DB2 wrapper , and nicknames for
each
database
Answer: D
IBM A2090-544 A2090-544 A2090-544 dump
NO.17 A database named MYDB was created by executing the following command:
CREATE DATABASE mydb AUTOMATIC STORAGE NO
Later, a decision is made to modify this database so that both it and its table spaces use
automatic
storage.
What steps are required to make this modification?
A. Use the ALTER DATABASE command to convert the database; all existing table spaces
will be
converted automatically.
B. Use the ALTER DATABASE command to convert the database; use the ALTER
TABLESPACE
command to convert all existing table spaces.
C. Use the ALTER DATABASE command to convert the database; use the ALTER
TABLESPACE
command to convert all existing SMS table spaces.
D. Use the ALTER DATABASE command to convert the database; use the ALTER
TABLESPACE
command to convert all existing DMS table spaces.
Answer: D
IBM덤프 A2090-544자료 A2090-544 A2090-544
NO.18 Given a newly created database and sufficient memory. If the following statements are
successful:
CREATE BUFFERPOOL bp1 SIZE 40MB;
CREATE BUFFERPOOL bp2 PAGESIZE 16K SIZE 40000;
How much memory will be allocated for buffer pools BP1 and BP2?
A. 40MB
B. 80MB
C. 665MB
D. 680MB
Answer: C
IBM A2090-544 A2090-544
NO.19 Table T1 was created by executing the following statement:
CREATE TABLE t1
(deptno CHAR(2) NOT NULL,
deptname VARCHAR(36) NOT NULL,
empno CHAR(3) NOT NULL)
Immediately after creation, table T1 was populated with 10 rows. Later, user USER1 ran an
application
that inserted 100,000 rows into table T1.
The following query is frequently ran against the T1 table:
SELECT deptno, empno, deptname FROM t1 WHERE deptno = 'EN' AND empno = '123'
Assuming current statics exist for the table and index, which index will provide optimal
performance for
this query?
A. CREATE INDEX idx1 ON t1 (deptno, empno) INCLUDE (deptname)
B. CREATE INDEX idx1 ON t1 (deptno, empno)
C. CREATE INDEX idx1 ON t1 (deptno) INCLUDE (empno)
D. CREATE INDEX idx1 ON t1 (deptno)
Answer: B
IBM A2090-544 A2090-544 A2090-544자료
NO.20 Given the following table spaces, their associated page size, and number of pages:
TSP1 - 16K page size, 10000 pages
TSP2 - 8K page size, 10000 pages
TSP3 - 4K page size, 20000 pages
USERSPACE1 - 4K page size, 5000 pages
Which sets of buffer pools will ensure that all of the data in the table spaces will be fit into
memory for
optimal data access?
A. IBMDEFAULTBP - 16K page size, 85000 pages
B. IBMDEFAULTBP - 4K page size, 25000 pages
BP1 -16K page size, 20000 pages
C. BP1 - page size 8K, 45000 pages
D. BP1 - 4K page size, 30000 pages
BP2 - 8K page size, 20000 pages
BP3 - 16K page size, 15000 pages
Answer: D
IBM dump A2090-544 A2090-544 A2090-544최신덤프
ITexamdump의 74-344덤프의 VCE테스트프로그램과 70-688덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-033시험에 대비한 고품질 덤프와 HP2-K35시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-412시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기