IBM인증 A2090-550시험이 너무 어려워 보여서 오르지못할 산처럼 보이시나요? 그건ITExamDump의 IBM인증 A2090-550시험문제에 대비하여 제작한IBM인증 A2090-550덤프가 있다는 것을 모르고 있기때문입니다. IBM인증 A2090-550시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 IBM인증 A2090-550덤프로 시험공부를 해보세요.시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다.
IBM 인증 A2090-550시험이 너무 어려워서 시험 볼 엄두도 나지 않는다구요? ITExamDump 덤프만 공부하신다면 IT인증시험공부고민은 이젠 그만 하셔도 됩니다. ITExamDump에서 제공해드리는IBM 인증 A2090-550시험대비 덤프는 덤프제공사이트에서 가장 최신버전이여서 시험패스는 한방에 갑니다. IBM 인증 A2090-550시험뿐만 아니라 IT인증시험에 관한 모든 시험에 대비한 덤프를 제공해드립니다. 많은 애용 바랍니다.
ITExamDump의 덤프선택으로IBM A2090-550인증시험에 응시한다는 것 즉 성공과 멀지 않았습니다. 여러분의 성공을 빕니다.
IBM인증 A2090-550시험패스는 고객님의 IT업계종사자로서의 전환점이 될수 있습니다.자격증을 취득하여 승진 혹은 연봉협상 방면에서 자신만의 위치를 지키고 더욱 멋진 IT인사로 거듭날수 있도록 고고싱할수 있습니다. ITExamDump의 IBM인증 A2090-550덤프는 시장에서 가장 최신버전으로서 시험패스를 보장해드립니다.
ITExamDump의IBM인증 A2090-550 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. IBM인증 A2090-550덤프로IBM인증 A2090-550시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. IBM인증 A2090-550덤프는 실제IBM인증 A2090-550시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.
IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. IBM인증 A2090-550시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITExamDump는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITExamDump의IBM인증 A2090-550덤프로 자격증을 편하게 취득하는게 어떨가요?
ITExamDump에는 전문적인 업계인사들이IBM A2090-550시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약ITExamDump의 제품을 구매하려면, 우리ITExamDump에서는 아주 디테일 한 설명과 최신버전 최고품질의자료를 즉적중율이 높은 문제와 답을제공합니다.IBM A2090-550자료는 충분한 시험대비자료가 될 것입니다. 안심하시고 ITExamDump가 제공하는 상품을 사용하시고, 100%통과 율을 확신합니다.
시험 번호/코드: A2090-550
시험 이름: IBM (Assessment: IBM solidDB and IBM solidDB Universal Cache)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 122 문항
업데이트: 2014-03-09
A2090-550 덤프무료샘플다운로드하기: http://www.itexamdump.com/A2090-550.html
NO.1 What are two possible reasons for high latency between a solidDB in-memory cache
and a back-end
database? (Choose two.)
A. Insufficient network bandwidth for the volume of transactions that are being processed.
B. The network connection between the solidDB in-memory cache and the back-end
database is
down.
C. There is database lock contention on the target database.
D. The CDC instances are stopped.
E. Table mappings are not configured properly.
Answer: A,C
IBM A2090-550 dumps A2090-550 A2090-550자격증 A2090-550덤프
NO.2 To execute the HotStandby administrative commands, which type of access privilege
would be
needed?
A. SYS_ADMIN_SYNC_ROLE
B. SYNC_ADMIN_ROLE
C. ADMIN_CONSOLE_ROLE
D. SYS_CONSOLE_ROLE
Answer: D
IBM A2090-550 A2090-550시험문제 A2090-550 dumps
NO.3 Which two are directly visible in solidDB server-side SQL Tracing? (Choose two.)
A. longest lasting statements in duration order
B. timestamps of statement preparation
C. timestamps of individual fetch operations
D. timestamps of individual rpc_session operations.
E. list of statements currently under execution
Answer: B,C
IBM최신덤프 A2090-550 A2090-550시험문제 A2090-550기출문제 A2090-550인증 A2090-550자격증
NO.4 What are two methods for generating a trace file containing database statement
executions
occurring in the solidDB server? (Choose two.)
A. Enable SQL tracing within the solidDB server.
B. Enable ODBC tracing within the solidDB ODBC driver.
C. Enable ODBC tracing within the ODBC Driver Manager.
D. Enable JDBC tracing within the solidDB JDBC driver.
E. Enable JDBC tracing within the JDBC Driver Manager.
Answer: A,C
IBM dump A2090-550 A2090-550기출문제 A2090-550 A2090-550기출문제
NO.5 Which statement regarding IBM solidDB Netbackup is true?
A. One IBM solidDB Netbackup Server can only serve one backup source server.
B. The command ADMIN COMMAND 'netbackup' is supported within the [Srv]At
configuration
parameter.
C. NetBackup copies logical database consisting of multiple files to one flat file to the
NetBackupDirectory by default.
D. If the specified remote directory does not exist, it is not created automatically by the
solidDB
Netbackup Server.
Answer: C
IBM dump A2090-550 A2090-550 A2090-550
NO.6 What are two effective ways to increase the throughput of replication between the
solidDB in-
memory cache and a back-end database? (Choose two.)
A. Add a summarization column to the source.
B. Use multiple subscriptions instead of just one.
C. Update the mirror_commit_after_max_transactions parameter to a higher value.
D. Ensure that the conflict resolution mechanism is set to "source".
E. Use only the Mirror (Continuous) form of replication.
Answer: B,C
IBM A2090-550자료 A2090-550인증 A2090-550 A2090-550최신덤프 A2090-550
NO.7 It is possible when using solsql to run scripts either interactively or nested within
another script.
Which special character is used to identify that you want to execute a script file?
A. &
B. @
C. #
D. !
Answer: B
IBM최신덤프 A2090-550 A2090-550자격증
NO.8 To administer a HotStandby database you need which privilege?
A. Sys_Sync_Admin_Role
B. Sys_Console_Role
C. Sys_Hotstandby_Role
D. Sys_Replication_Role
Answer: B
IBM자격증 A2090-550 A2090-550 A2090-550 dumps
NO.9 What is the correct setup topology when deploying IBM solidDB Universal Cache in
conjunction
with IBM solidDB High Availability (HotStandby) functionality?
A. CDC for solidDB instances are running on both the Primary node and on the Secondary
node,
each CDC instance locally connecting to one solidDB server.
B. CDC for solidDB instance is running on the back-end node, remotely connecting to both
Primary and Secondary solidDB servers.
C. CDC for solidDB instance is running on the back-end node, remotely connecting to the
Primary
server. Connection to the Secondary server is managed using Advanced Replication.
D. CDC for solidDB instance is running on the Primary node, locally connecting to the
Primary
server. Connection to the Secondary server is managed by transparent failover.
Answer: B
IBM자료 A2090-550 A2090-550시험문제 A2090-550최신덤프 A2090-550
NO.10 When setting the [HotStandby]SafenessLevel = Auto, which two statements are true
about
transaction durability and HotStandby safeness level? (Choose two.)
A. SafenessLevel switches to 1-safe when using [Logging]DurabilityLevel = 1(Relaxed).
B. SafenessLevel switches to 2-safe when using [Loggng]DurabilityLevel = 2(Adaptive).
C. SafenessLevel switches to 1-safe when using [Logging]DurabilityLevel = 3(Strict).
D. SafenessLevel switches to 2-safe when using [Logging]DurabiltyLevel = 4(Custom).
E. SafenessLevel switches to 1-safe when using [Logging]DurabiltyLevel = 2(Adaptive).
Answer: A,B
IBM A2090-550시험문제 A2090-550 A2090-550
NO.11 A solidDB disk-based database instance has been optimally running for six months and
starts to
experience major degradation in performance. Upon executing an overall DB status report
using ADMIN
COMMAND "status", it is noted that the value for index writes after last merge is at
20945876. Why would this be a probable cause of the performance degradation?
A. A large value for this counter signifies that the creation of indices, after a large batch insert
process, has been halted leading to excessive memory usage which can cause serious
performance issues.
B. A large value for this counter signifies that a large number of transactions are being
checkpointed which can cause serious performance issues.
C. A large value for this counter signifies that the multi-versioning storage tree is not being
flushed
to disk due to a long running transaction which can cause serious performance issues.
D. A large value for this counter signifies that a transaction performing a merge-join is
utilizing a
large amount of memory causing potential process paging/swapping leading to serious
performance issues.
Answer: C
IBM자료 A2090-550 A2090-550자격증
NO.12 What are two possible conflict resolution methods between solidDB and a back-end
database?
(Choose two.)
A. Source wins
B. Reference
C. Trigger
D. UserExit
E. Alert user
Answer: A,D
IBM A2090-550 dumps A2090-550최신덤프
NO.13 After completing the upgrade of the Primary server while performing a cold HSB-
incompatible
upgrade, what is the correct sequence of steps to upgrade to the Secondary server?
A. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ACTIVE
state;
perform a 'hsb connect' command to resynchronize the servers and restore to normal
operation.
B. Upgrade both servers; start and verify that the upgrade Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ACTIVE
state;
perform a 'hsb netcopy' command followed by 'hsb connect' to resynchronize the servers and
restore to normal operation.
C. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ACTIVE state; start the Secondary server and verify that it is in a SECONDARY ALONE
state;
perform a 'hsb connect' command to resynchronize the servers and restore to normal
operation.
D. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ALONE
state;
perform a 'hsb netcopy' command followed by 'hsb connect' to resynchronize the servers and
restore to normal operation.
Answer: D
IBM A2090-550 pdf A2090-550자격증 A2090-550
NO.14 To execute the admin command "status", what is the correct syntax?
A. solsql -e "COMMAND 'status' " "tcp 1313" dba dba
B. solsql -f "ADMIN STATUS 'status' " "tcp 1313" dba dba
C. solcon "status" "tcp 1313" dba dba
D. solcon -e "status" "tcp 1313" dba dba
Answer: D
IBM A2090-550 A2090-550 A2090-550자료
NO.15 Which software components must be installed to deploy IBM solidDB Universal Cache
and provide
access to data residing in an IBM DB2 database?
A. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC for DB2,
IBM
InfoSphere CDC Access Server, and IBM InfoSphere CDC Management Console
B. IBM solidDB, IBM DB2, IBM Universal Cache for DB2,IBM InfoSphere CDC Replication
Center,
and IBM InfoSphere CDC Management Console
C. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC Access
Server,
and IBM InfoSphere CDC Management Console
D. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC for DB2,
IBM
InfoSphere CDC Replication Center, and IBM InfoSphere CDC Management Console
Answer: A
IBM기출문제 A2090-550덤프 A2090-550
NO.16 You have setup solidDB Universal Cache such that you have a table DBA.ORG in the
solidDB
front-end, being mirrored to a back-end database. After some time, you notice that the
subscription is Inactive and you try to start Mirroring (Continuous). The subscription state
remains
Inactive and the Event Log shows that the structure of table DBA.ORG has changed. What is
the
recommended course of action?
A. In solidDB, drop the ORG table and recreate it; then restart the subscription.
B. In the backend database, drop the ORG table and recreate it; then restart the subscription.
C. In solidDB, change the table definition to what it was previously; then restart the
subscription.
D. In the Management Console, use the 'Update table definition' option, for the source in the
Table
Mappings area; then restart the subscription.
Answer: D
IBM dump A2090-550 A2090-550 A2090-550인증
NO.17 To set up solidDB in a standalone, HotStandby or Universal Cache configuration,
where can the
configuration be performed?
A. The configuration is performed from the command line using the solid command with
suitable
option settings and values.
B. The configuration needs to be set in a solid.ini file.
C. The configurations can be set up by using the solsql tool and the operating system
services file.
D. The standalone configuration is set in the solid.ini file while the HotStandby and Universal
Cache configuration is set using the sqlcon tool.
Answer: B
IBM A2090-550최신덤프 A2090-550인증 A2090-550
NO.18 To set the transaction log retention space size for solidDB Universal Cache in the
solidDB
configuration file (solid.ini), which parameter is used?
A. [LogReader]
MaxLogSize
B. [Com]
ReadBufSize
C. [Hotstandby]
MaxMemLogSize
D. [indexFile]
CacheSize
Answer: A
IBM덤프 A2090-550 A2090-550자격증 A2090-550
NO.19 How many different installations of solidDB binaries can exist on the same host?
A. one
B. as many as can fit
C. one per release of solidDB
D. one per version of solidDB
Answer: B
IBM덤프 A2090-550 A2090-550 A2090-550
NO.20 Click the Exhibit button.
In the exhibit, what does the attached replication diagram show?
A. All subscriptions are Mirroring Continuous.
B. The subscription FERO_BERW is Inactive.
C. The subscription FERO_BERW is Mirroring Continuous.
D. All subscriptions are using bidirectional Mirroring Continuous.
Answer: C
IBM A2090-550기출문제 A2090-550 A2090-550시험문제 A2090-550
ITexamdump의 LOT-405덤프의 VCE테스트프로그램과 000-N37덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 CAT-340시험에 대비한 고품질 덤프와 BAS-002시험 최신버전덤프를 제공해드립니다. 최고품질 EX0-101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기