Citrix인증 1Y0-A28시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 Citrix인증 1Y0-A28시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의Citrix인증 1Y0-A28덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.
Pass4Tes가 제공하는 제품을 사용함으로 여러분은 IT업계하이클래스와 멀지 않았습니다. Pass4Tes 가 제공하는 인증시험덤프는 여러분을Citrix인증1Y0-A28시험을 안전하게 통과는 물론 관연전업지식장악에도 많은 도움이 되며 또한 우리는 일년무료 업뎃서비스를 제공합니다.
ITExamDump의 경험이 풍부한 전문가들이Citrix 1Y0-A28인증시험관련자료들을 계획적으로 페펙트하게 만들었습니다.Citrix 1Y0-A28인증시험응시에는 딱 좋은 자료들입니다. ITExamDump는 최고의 덤프만 제공합니다. 응시 전Citrix 1Y0-A28인증시험덤프로 최고의 시험대비준비를 하시기 바랍니다.
시험 번호/코드: 1Y0-A28
시험 이름: Citrix (Implementing NetScaler 10 for Networking and Traffic Optimization)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 123 문항
업데이트: 2014-01-19
ITExamDump에서는 시장에서 가장 최신버전이자 적중율이 가장 높은 Citrix인증 1Y0-A28덤프를 제공해드립니다. Citrix인증 1Y0-A28덤프는 IT업종에 몇십년간 종사한 IT전문가가 실제 시험문제를 연구하여 제작한 고품질 공부자료로서 시험패스율이 장난 아닙니다. 덤프를 구매하여 시험에서 불합격성적표를 받으시면 덤프비용 전액을 환불해드립니다.
지금 같은 정보시대에, 많은 IT업체 등 사이트에Citrix 1Y0-A28인증관련 자료들이 제공되고 있습니다, 하지만 이런 사이트들도 정확하고 최신 시험자료 확보는 아주 어렵습니다. 그들의Citrix 1Y0-A28자료들은 아주 기본적인 것들뿐입니다. 전면적이지 못하여 응시자들의 관심을 쌓지 못합니다.
지금 같은 세대에 많은 분들이 IT업계에 관심을 가지고 있습니다. 이렇게 인재가 많은 사회에서 IT관련인사들은 아직도 적은 편입니다. 면접 시에도 IT인증 자격증유무를 많이들 봅니다. 때문에 IT자격증이 많은 인기를 누리고 있습니다.이런 살아가기 힘든 사회에서 이런 자격증들 또한 취득하기가 넘 어렵습니다.Citrix 1Y0-A28인증시험 또한 아주 어려운 시험입니다. 많은 분들이 응시하지만 통과하는 분들은 아주 적습니다.
ITExamDump의 Citrix인증 1Y0-A28시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 Citrix인증 1Y0-A28덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. Citrix인증 1Y0-A28시험을 통과하여 자격증을 취득하려면ITExamDump의 Citrix인증 1Y0-A28덤프로 시험준비공부를 하세요.
1Y0-A28 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Y0-A28.html
NO.1 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D
Citrix dump 1Y0-A28기출문제 1Y0-A28 1Y0-A28 1Y0-A28
NO.2 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B
Citrix 1Y0-A28 1Y0-A28 dumps 1Y0-A28
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A
Citrix 1Y0-A28 1Y0-A28
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B
Citrix 1Y0-A28 1Y0-A28최신덤프 1Y0-A28 1Y0-A28인증 1Y0-A28자료
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C
Citrix 1Y0-A28 1Y0-A28 1Y0-A28
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C
Citrix최신덤프 1Y0-A28 1Y0-A28 1Y0-A28 1Y0-A28시험문제
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B
Citrix 1Y0-A28 dump 1Y0-A28 1Y0-A28시험문제 1Y0-A28자료
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C
Citrix 1Y0-A28 1Y0-A28 1Y0-A28 dumps
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B
Citrix기출문제 1Y0-A28 1Y0-A28덤프 1Y0-A28덤프 1Y0-A28최신덤프 1Y0-A28
NO.3 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C
Citrix 1Y0-A28 1Y0-A28덤프 1Y0-A28 1Y0-A28 1Y0-A28시험문제
NO.4 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B
Citrix기출문제 1Y0-A28자격증 1Y0-A28
NO.5 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B
Citrix 1Y0-A28최신덤프 1Y0-A28 1Y0-A28 dumps 1Y0-A28 dumps
ITexamdump의 MB3-701덤프의 VCE테스트프로그램과 C_HANATEC131덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 200-120시험에 대비한 고품질 덤프와 BAS-004시험 최신버전덤프를 제공해드립니다. 최고품질 000-N32시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기