Network Appliance NS0-501 시험문제

Network Appliance 인증 NS0-501시험에 도전해보려고 결정하셨다면 ITExamDump덤프공부가이드를추천해드립니다. ITExamDump덤프는 고객님께서 필요한것이 무엇인지 너무나도 잘 알고 있답니다. ITExamDump의 Network Appliance 인증 NS0-501덤프는Network Appliance 인증 NS0-501시험을 쉽게 만듭니다.

ITExamDump 에서는 IT인증시험에 대비한 퍼펙트한Network Appliance 인증NS0-501덤프를 제공해드립니다. 시험공부할 시간이 충족하지 않은 분들은ITExamDump 에서 제공해드리는Network Appliance 인증NS0-501덤프로 시험준비를 하시면 자격증 취득이 쉬워집니다. 덤프를 구매하시면 일년무료 업데이트서비스도 받을수 있습니다.

ITExamDump에서는 시장에서 가장 최신버전이자 적중율이 가장 높은 Network Appliance인증 NS0-501덤프를 제공해드립니다. Network Appliance인증 NS0-501덤프는 IT업종에 몇십년간 종사한 IT전문가가 실제 시험문제를 연구하여 제작한 고품질 공부자료로서 시험패스율이 장난 아닙니다. 덤프를 구매하여 시험에서 불합격성적표를 받으시면 덤프비용 전액을 환불해드립니다.

ITExamDump에서 출시한 Network Appliance인증 NS0-501덤프는Network Appliance인증 NS0-501시험에 대비하여 IT전문가들이 제작한 최신버전 공부자료로서 시험패스율이 100%입니다.ITExamDump는 고품질 Network Appliance인증 NS0-501덤프를 가장 친근한 가격으로 미래의 IT전문가들께 제공해드립니다. ITExamDump의 소원대로 멋진 IT전문가도 거듭나세요.

시험 번호/코드: NS0-501
시험 이름: Network Appliance (Network Appliance Implementation Engineer-SAN)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 100 문항
업데이트: 2013-11-13

NS0-501 덤프무료샘플다운로드하기: http://www.itexamdump.com/NS0-501.html

NO.1 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A.SnapMover and Fibre Channel at the disaster recovery site for all hosts
B.SnapMirror and iSCSI at the disaster recovery site for all hosts
C.Fibre Channel at both locations using ftp to replicate storage
D.MetroCluster and NAS
Answer:B

Network Appliance   NS0-501시험문제   NS0-501   NS0-501

NO.2 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A.EMutil
B.SANutil
C.hbainfo
D.SANsurfer
E.HBAnywhere
Answer:E

Network Appliance   NS0-501 dumps   NS0-501 dump   NS0-501   NS0-501

NO.3 Which command do you use to see the rate of change between two successive Snapshot copies in a
flexible volume in Data ONTAP?
A.snap diff
B.snap calculate
C.snap delta
D.snap space
Answer:C

Network Appliance   NS0-501   NS0-501   NS0-501   NS0-501자격증

NO.4 A company has deployed a NetApp dual controller FAS3100 series with iSCSI. Currently, there are five
Windows servers and three Novell NetWare servers connected to the IP SAN. The customer wants to
connect an HP-UX server to the IP SAN.
Which cfmode allows all operating systems to co-exist in the IP SAN?
A.single_image
B.standby
C.cfmode not applicable
D.dual_fabric
Answer:C

Network Appliance인증   NS0-501시험문제   NS0-501   NS0-501자격증

NO.5 For which four operations would you use igroup throttles on a NetApp storage solution? (Choose four.)
A.to assign a specific percentage of the queue resources on each physical port to the igroup
B.to manage pathing to the LUNs
C.to reserve a minimum percentage of queue resources for a specific igroup
D.to limit the number of concurrent I/O requests an initiator can send to the storage system
E.to restrict an igroup to a maximum percentage of use
F.to manage space reclamation
Answer:ACDE

Network Appliance덤프   NS0-501   NS0-501   NS0-501 dump

NO.6 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A.EMutil
B.SANutil
C.cfgadmin
D.SANsurfer
E.HBAnywhere
Answer:D

Network Appliance   NS0-501   NS0-501

NO.7 Click the Exhibit button.
A Solaris 10 host with VERITAS Storage Foundation 4.1 is FCP attached to a FAS3140 high availability
storage system running single image cfmode.
Using the diagram shown, which ports will be considered active by VERITAS DMP using the NetApp ASL
to a LUN on controller 1 mapped to host 1?
A.Port 0b on controller 1 only
B.Port 0d on controller 1 only
C.Port 0b and 0d on controller 1 only
D.Ports 0b and 0d on both controller 1 and controller 2
Answer:C

Network Appliance   NS0-501   NS0-501   NS0-501

NO.8 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A.EMutil
B.SANutil
C.fcp config
D.SANsurfer
E.HBAnywhere
Answer:E

Network Appliance   NS0-501   NS0-501 dumps

NO.9 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A.point-to-point
B.switched fabric
C.arbitrated loop
D.ring
Answer:B

Network Appliance   NS0-501   NS0-501기출문제   NS0-501시험문제

NO.10 A company has a Fibre Channel environment and wants to connect a new host in a remote data center
using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A.50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B.50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C.50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D.50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer:D

Network Appliance dump   NS0-501   NS0-501   NS0-501

ITexamdump의 000-225덤프의 VCE테스트프로그램과 200-120덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-614시험에 대비한 고품질 덤프와 70-684시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-W100시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/NS0-501.html