ITExamDump는 IT인증시험 자격증 공부자료를 제공해드리는 전문적인 사이트입니다. ITExamDump제품은 100%통과율을 자랑하고 있습니다. Alcatel-Lucent인증 4A0-101시험이 어려워 자격증 취득을 망설이는 분들이 많습니다. ITExamDump가 있으면 이런 걱정은 하지 않으셔도 됩니다. ITExamDump의Alcatel-Lucent인증 4A0-101덤프로 시험을 한방에 통과하여 승진이나 연봉인상에 도움되는 자격증을 취득합시다.
Alcatel-Lucent인증 4A0-101시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. ITExamDump에서 연구제작한 Alcatel-Lucent인증 4A0-101덤프는Alcatel-Lucent인증 4A0-101시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. ITExamDump덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은ITExamDump가 지켜드립니다.
우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는Alcatel-Lucent 4A0-101관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.
ITExamDump는 우수한 IT인증시험 공부가이드를 제공하는 전문 사이트인데 업계에서 높은 인지도를 가지고 있습니다. ITExamDump에서는 IT인증시험에 대비한 모든 덤프자료를 제공해드립니다. Alcatel-Lucent인증 4A0-101시험을 준비하고 계시는 분들은ITExamDump의Alcatel-Lucent인증 4A0-101덤프로 시험준비를 해보세요. 놀라운 고득점으로 시험패스를 도와드릴것입니다.시험에서 불합격하면 덤프비용 전액환불을 약속드립니다.
영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인Alcatel-Lucent인증 4A0-101시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. Alcatel-Lucent인증 4A0-101시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의Alcatel-Lucent인증 4A0-101덤프는 Alcatel-Lucent인증 4A0-101시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.
지금21세기 IT업계가 주목 받고 있는 시대에 그 경쟁 또한 상상할만하죠, 당연히 it업계 중Alcatel-Lucent 4A0-101인증시험도 아주 인기가 많은 시험입니다. 응시자는 매일매일 많아지고 있으며, 패스하는 분들은 관련it업계에서 많은 지식과 내공을 지닌 분들뿐입니다.
시험 번호/코드: 4A0-101
시험 이름: Alcatel-Lucent (Alcatel-Lucent Interior Routing Protocols and High Availability)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 177 문항
업데이트: 2013-11-12
4A0-101 덤프무료샘플다운로드하기: http://www.itexamdump.com/4A0-101.html
NO.1 Which of the following statements apply to link state protocol behavior? Choose three
answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C,E
Alcatel-Lucent최신덤프 4A0-101시험문제 4A0-101최신덤프 4A0-101
NO.2 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure
router static-route 10.2.3.0/ 24 next-hop 10.1.2.1" command. What is the correct traceroute
command to test this static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A
Alcatel-Lucent 4A0-101인증 4A0-101 4A0-101 4A0-101 4A0-101덤프
15. What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B
Alcatel-Lucent 4A0-101최신덤프 4A0-101
16. Which of the following statements regarding distance vectors protocols are true? (Choose
two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted
beyond the immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant
routers and how they interconnect
Answer: A,C
Alcatel-Lucent pdf 4A0-101 4A0-101 4A0-101
NO.3 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B
Alcatel-Lucent 4A0-101 4A0-101
NO.4 Which of the following commands can be used to display the number of SPF computations
that have been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A
Alcatel-Lucent 4A0-101 pdf 4A0-101
NO.5 When a router receives an IP packet, but does not find a match in the routing table for the
destination IP address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B
Alcatel-Lucent덤프 4A0-101 4A0-101덤프 4A0-101자료
NO.6 Static routing will be used in a network between a corporate head office, with many
connected networks, and a branch office, with one connection to the head office. Which of the
following best describes the likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more
specific static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office
router will have a default route.
Answer: D
Alcatel-Lucent 4A0-101 4A0-101 4A0-101 4A0-101
NO.7 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming
that there are no stub networks, which of the following statements regarding type 4 LSA generation
is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA
that is flooded to area 2.
Answer: D
Alcatel-Lucent인증 4A0-101 pdf 4A0-101 4A0-101
NO.8 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B
Alcatel-Lucent최신덤프 4A0-101 4A0-101시험문제 4A0-101
NO.9 Click the exhibit button.
Routers R1, R2, and R3 are running a classful routing protocol between them. Assuming that router
R1 advertises all directly connected networks, how will these networks be represented in router
R3's routing table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/ 24 and one entry for 10.1.2.0/ 24.
C. The networks will be represented with one entry of 10.0.0.0/ 8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/ 24 in router R3's route table.
Answer: C
Alcatel-Lucent 4A0-101 4A0-101
NO.10 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach
the network behind router R2?
A. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2 / 24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/ 24 next-hop 139.120.121.2
Answer: A
Alcatel-Lucent 4A0-101 4A0-101
NO.11 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2
goes down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of
Hello timeouts. At this point, both routers R1 and R2 re-compute their link state database and send
updates to their adjacent routers. Once the process is complete for all routers, the networks have
converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At
this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information.
At this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link
is down. At this point, both routers R1 and R2 re-compute their link state database and sendupdates
to their adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A
Alcatel-Lucent dump 4A0-101최신덤프 4A0-101자료 4A0-101
NO.12 Click the exhibit button.
A static route is created on router R1, using the "static-route 0.0.0.0/ 0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/ 0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C
Alcatel-Lucent dump 4A0-101자료 4A0-101
NO.13 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D
Alcatel-Lucent 4A0-101시험문제 4A0-101 dump
NO.14 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D
Alcatel-Lucent 4A0-101 4A0-101 4A0-101 pdf 4A0-101
ITexamdump의 70-342덤프의 VCE테스트프로그램과 SY0-301덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_TADM53_70시험에 대비한 고품질 덤프와 1Z0-511시험 최신버전덤프를 제공해드립니다. 최고품질 70-688시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기