ITExamDump는EMC E20-520인증시험을 아주 쉽게 패스할 수 있도록 도와드리는 사이트입니다. ITExamDump의 엘리트한 전문가가 끈임 없는 노력으로 최고의EMC E20-520자료를 만들었습니다. 이 자료로 여러분은 100%EMC의E20-520인증시험을 패스할 수 있으며, ITExamDump을 선택함으로 성공을 선택한 것입니다. ITExamDump가 제공하는 시험가이드로 효과적인 학습으로 많은 분들이 모두 인증시험을 패스하였습니다. 이건 모두 ITExamDump 인증시험덤프로 공부하였기 때문입니다. 그 중EMC E20-520인증시험을 패스한 분들도 모두 ITExamDump인증시험덤프를 사용하였기 때문입니다.
ITExamDump는 IT인증관련덤프를 제공하는 최고의 업체입니다, 덤프들은 ITExamDump의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 최고의 제품입니다. 그리고 우리는 온라인무료 서비스도 제공되어 제일 빠른 시간에 소통 상담이 가능합니다.
IT인증자격증은 국제적으로 승인받는 자격증이기에 많이 취득해두시면 취업이나 승진이나 이직이나 모두 편해집니다. 다른 사람이 없는 자격증을 내가 가지고 있다는것은 실력을 증명해주는 수단입니다. EMC인증 E20-520시험은 널리 승인받는 자격증의 시험과목입니다. EMC인증 E20-520덤프로EMC인증 E20-520시험공부를 하시면 시험패스 난이도가 낮아지고 자격증 취득율이 높이 올라갑니다.자격증을 많이 취득하여 취업이나 승진의 문을 두드려 보시면 빈틈없이 닫힌 문도 활짝 열릴것입니다.
E20-520인증시험은EMC인증시험중의 하나입니다.그리고 또한 비중이 아주 큰 인증시험입니다. 그리고EMC E20-520인증시험 패스는 진짜 어렵다고 합니다. 우리ITExamDump에서는 여러분이E20-520인증시험을 편리하게 응시하도록 전문적이 연구팀에서 만들어낸 최고의E20-520덤프를 제공합니다, ITExamDump와 만남으로 여러분은 아주 간편하게 어려운 시험을 패스하실 수 있습니다,
시험 번호/코드: E20-520
시험 이름: EMC (Calriion solutions specialist exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 520 문항
업데이트: 2013-09-28
우리ITExamDump의 덤프는 여러분이EMC E20-520인증시험응시에 도움이 되시라고 제공되는 것입니다, 우라ITExamDump에서 제공되는 학습가이드에는EMC E20-520인증시험관연 정보기술로 여러분이 이 분야의 지식 장악에 많은 도움이 될 것이며 또한 아주 정확한EMC E20-520시험문제와 답으로 여러분은 한번에 안전하게 시험을 패스하실 수 있습니다,EMC E20-520인증시험을 아주 높은 점수로 패스할 것을 보장해 드립니다,
EMC E20-520인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.EMC E20-520시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.
E20-520 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-520.html
NO.1 Which object would maintain the changes to a source LUN in the event a MirrorView/S configuration
suffered a link outage followed by an SP trespass?
A.Metavolume
B.Fracture log
C.Write intent log
D.Clone private LUN
Answer:C
EMC E20-520기출문제 E20-520최신덤프 E20-520 dump E20-520 E20-520
NO.2 The primary image of a MirrorView/S mirror set has trespassed from SPA to SPB on the primary
array.Which SP now owns the secondary image?
A.ALUA determines ownership
B.SPA on the secondary array
C.Neither SPA or SPB
D.SPB on the secondary array
Answer:D
EMC E20-520덤프 E20-520
NO.3 What makes sizing of the reserved LUN pool a non-trivial task?
A.Reserved LUNs are assigned to specific source LUNs when the CLARiiON is laid out.
B.Source LUNs can be different sizes and only write to LUNs of the same size.
C.Reserved LUN pools may be different sizes and allocation to source LUNs is based on the next
available reserved LUN.
D.There are 512 reserved LUNs in all CLARiiON models while there may be many more source LUNs.
Answer:C
EMC E20-520 E20-520최신덤프 E20-520 dumps
NO.4 The number and size of SnapView pointers have reached memory allocation. What will take place to
adjust to this situation?
A.Pointers will be paged to the reserved LUN as required.
B.128 KB memory chunks will be added until the memory usage has been satisfied.
C.Pointers will be paged to and from the reserved LUN as required in 512 KB chunks.
D.An additional reserve LUN will be required.
Answer:C
EMC E20-520 E20-520덤프 E20-520 E20-520 dump
NO.5 If a customer wants to present a secondary image LUN of a MirrorView/S mirror set to a host, what
must they do first?
A.The primary image must be removed from the mirror set.
B.The secondary image must be placed in the host storage group.
C.The secondary image must be removed from the mirror set or the secondary image promoted to a
primary image.
D.The secondary image must be fractured from the mirror set or the secondary image promoted to a
primary image.
Answer:C
EMC기출문제 E20-520최신덤프 E20-520인증 E20-520최신덤프
NO.6 Which device is enabled by default when creating a mirror set in a MirrorView/S environment on a
CX4-120 with FLARE 28?
A.Write intent log
B.Reserved LUN pool
C.Secondary Image
D.Clone private LUN
Answer:B
EMC E20-520 E20-520자격증
NO.7 A customer intends to use clones in their environment. They are concerned about the usability of clone
data.They ask about the result of removing a clone from a clone group.Which statement describes the
result of that operation?
A.Clone LUN may be used for reverse-synchronization operations.
B.Clone LUN may be used for synchronization operations.
C.Data on the clone LUN is flagged in the clone private LUN.
D.Data on the clone LUN is not affected and may be used by a host.
Answer:D
EMC E20-520 E20-520 E20-520 dump E20-520 E20-520
NO.8 What happens when a snapshot is deactivated?
A.The snapshot becomes inaccessible to the primary host.
B.The SnapView session ends.
C.The snapshot becomes inaccessible to the secondary host.
D.All metadata is removed from the SP.
Answer:C
EMC기출문제 E20-520자료 E20-520자료 E20-520
NO.9 What does the fracture log allow?
A.Incremental resynchronization of data
B.Creation of markers for each modified track
C.Capture of persistency errors from the source to target
D.Connectivity failures from both directions
Answer:A
EMC E20-520 dumps E20-520 E20-520
NO.10 Should a SnapView session stop automatically, what will happen to the running sessions?
A.All sessions pointing to the clone will fail over to SP B and continue to write.
B.All sessions running on the source LUN will be terminated.
C.Host buffers will be flushed and sessions restarted.
D.All memory mapping entries will be saved to the COFW log.
Answer:A
EMC덤프 E20-520 dumps E20-520 E20-520자격증 E20-520
NO.11 Which statement applies when the Protected Restore option is enabled on a clone?
A.Once the reverse synchronization is complete, the clone is fractured.
B.All SnapView sessions on the source LUN must be stopped.
C.A clone cannot be marked "dirty" before starting a reverse synchronization.
D.When reverse synchronization is in process, no writes are allowed to the source LUN or clone.
Answer:A
EMC E20-520 pdf E20-520 E20-520
NO.12 Which best describes the MirrorView/A replication process?
A.A write is received, tracked in the SAN Copy delta set mechanism, transmitted to the secondary array.
B.A write is received, tracked in the fracture log, transmitted to the secondary array.
C.A write is received, tracked in the SnapView private LUN, transmitted to the secondary array.
D.A write is received, tracked in the write intent log, transmitted to the secondary array.
Answer:A
EMC E20-520 E20-520 E20-520시험문제
NO.13 A storage administrator wants to use a point-in-time copy of a production LUN for testing and possibly
keep any changed data from that copy. The administrator's goal is to minimize the performance impact on
the production LUN as well as use the point-in-time copy for restoring their data.What is the extent size for
this LUN?
A.Use a clone and promote it as needed
B.Use a clone and reverse-synchronize as needed
C.Use a snapshot of a clone and roll back as needed
D.Use a snapshot and deactivate command to make changes permanent on the production LUN
Answer:B
EMC자료 E20-520덤프 E20-520 dumps
NO.14 A customer starts four SnapView sessions on a source LUN. The sessions are scheduled to start at
8:00 A.M., 12:00 P.M., 4:00 P.M., and 8:00 P.M. At 5:15 P.M. the reserved LUN pool runs out of
space.What will happen next?
A.Most recently allocated reserved LUN will be released.
B.Reserved LUN allocated first will be released.
C.Space used by all sessions on the source LUN will be released.
D.Space used by the session that performed the most recent write will be released.
Answer:D
EMC E20-520자료 E20-520자료 E20-520기출문제
NO.15 What CLARiiON is needed to meet a customer's requirement for their MirrorView/S environment that
will have 50 consistency groups?
A.CX4, FLARE 22
B.CX4, FLARE 28
C.CX3, FLARE 26
D.CX3, FLARE 28
Answer:B
EMC덤프 E20-520 E20-520 pdf E20-520기출문제
NO.16 In a MirrorView/S environment, a primary image is owned by SPA on the primary array. Which SP must
own the secondary image on the secondary array within the same mirror set?
A.Either SP on the secondary array
B.SPB on the secondary array
C.SPA on the secondary array
D.It is marked as a private LUN on the secondary array
Answer:C
EMC자격증 E20-520 E20-520 dump E20-520 dump E20-520최신덤프
NO.17 A storage administrator tries to create a clone group on a CLARiiON CX4 and receives an error
message that stops the clone group from being created.What could be a possible cause?
A.MirrorView has not been configured.
B.Population latency has not been configured.
C.No CPLs have been allocated.
D.No reserved LUNs have been allocated.
Answer:C
EMC시험문제 E20-520시험문제 E20-520자료 E20-520최신덤프
NO.18 Which statement describes the operation of the reserved LUN pool?
A.LUN IDs of reserved LUNs in the reserved LUN pool can only be between 2048 and 4096.
B.All reserved LUNs must be the same size, on FC disks, and have the same RAID type.
C.Separate reserved LUN pools are required for SnapView, Incremental SAN Copy, and MirrorView/A.
D.Reserved LUN pool is shared between SnapView, Incremental SAN Copy, and MirrorView/A.
Answer:D
EMC E20-520기출문제 E20-520 E20-520시험문제
NO.19 During normal MirrorView/S operations, Navisphere Manager permits host access to how many
secondary images?
A.0
B.1
C.2
D.4
Answer:A
EMC E20-520인증 E20-520덤프 E20-520
NO.20 What is the process for flagging source LUNs?
A.Snapshots are created, changing the LUN's state.
B.Via GUI interface or CLI the state change bit is switched.
C.The PSM LUN is set to "source."
D.Via Navisphere Analyzer the FLARE LUN is changed to a PSM LUN.
Answer:A
EMC dump E20-520최신덤프 E20-520
ITexamdump의 000-155덤프의 VCE테스트프로그램과 FCNSP.v5덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-540시험에 대비한 고품질 덤프와 1Z0-466시험 최신버전덤프를 제공해드립니다. 최고품질 BAS-002시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기